Related Manuals for Siemens WQ56B2C00W
Summary of Contents for Siemens WQ56B2C00W
- Page 1 WQ56B2C00W Tumble dryer EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
- Page 2 Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Programmes ...... 25 1.1 General information.... 4 8.1 Automatic programmes... 25 1.2 Intended use...... 4 8.2 Timed programmes .... 26 1.3 Restriction on user group.. 4 9 Accessories....... 28 1.4 Safe installation ......
- Page 3 14 Crease-removal function .. 34 19 Cleaning and servicing ... 44 14.1 Starting a programme with 19.1 Water tank filter ..... 44 the crease-removal function .. 35 19.2 Moisture sensor..... 44 14.2 Filling the water tank ..... 35 19.3 Condensation container fil- ter ..........
- Page 4 en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡...
- Page 5 Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶...
- Page 6 en Safety WARNING ‒ Risk of injury! The heavy weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. ▶ If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. Only stack the dryer on a washing machine using the connec- ▶...
- Page 7 Safety en Wear protective gloves when installing and transporting the ap- ▶ pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always ▶...
- Page 8 en Safety WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff. Do not drink or reuse the condensation water from the appli- ▶ ance. Detergents and care products may result in poisoning if con- sumed.
- Page 9 Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately ▶ and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance.
- Page 10 en Safety If the power cord of this appliance is damaged, it must be re- ▶ placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk. An ingress of moisture can cause an electric shock. Before cleaning, pull out the mains plug or switch off the fuse in ▶...
- Page 11 Preventing material damage en Foam and foam rubber may deform Preventing material damage 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may Preventing material damage ATTENTION! damage the surfaces of the appli- The functionality of the appliance ance.
- Page 12 en Installation and connection Spin the laundry in the washing ma- Installation and connection 4 Installation and con- chine before drying. nection a Damper laundry extends the pro- gramme duration and increases Installation and connection energy consumption. 4.1 Unpacking the appliance Observe the programme's maximum ATTENTION! load capacity.
- Page 13 Installation and connection en Replace the accessories in ques- ▶ Installation loca- Requirements tion before operating the appli- tion ance. On the floor Place the appli- → "Accessories", Page 28 ance on a clean, level and firm The delivery consists of the following: surface.
- Page 14 en Installation and connection Requirements Installation loca- Requirements The appliance and the accessory ¡ tion have been unpacked. Against a wall Do not trap the → "Unpacking the appliance", hoses and power Page 12 cord between the The appliance is installed at the in- ¡...
- Page 15 Installation and connection en Push the water outlet hose as far Water outlet connection types as it will go into the connecting ATTENTION! piece. In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶...
- Page 16 en Installation and connection bow and secure it using fixing ma- terial. Secure the elbow to the gully. 4.5 Aligning the appliance In order to reduce vibrations and noises, align the appliance correctly. To align the appliance, turn the ap- ▶ pliance feet. Check that the appli- ance is level using a spirit level.
- Page 17 Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
- Page 18 en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Changing a setting value Programmes → Page 25 If you activate certain settings, the Programme selector display shows selection buttons and → Page 29...
- Page 19 Display en Display 6 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. 10h Program end time → "Buttons", Page 24 Shortened programme duration is activated. → "Buttons", Page 23 ...
- Page 20 en Display Display Description The crease-reduction function is activated. → "Buttons", Page 23 Gentle drying is activated for delicate fabrics. → "Buttons", Page 23 You can remove or add laundry, and interrupt the current programme. → Page 30 The process of killing bacteria and viruses in the fabrics is activated.
- Page 21 Buttons en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Buttons Button Selection Description Start Start, cancel or pause ¡ the programme. Cancel ¡ If is displayed, you can Pause ¡ pause the programme. If ...
- Page 22 en Buttons Button Selection Description Saving Press the button for ap- ¡ 收藏 prox. 3 seconds to save Setting ¡ your customised pro- gram settings. → "Saving the pro- gramme settings", Page 30 If you briefly press the button, you can set cus- tomised program set- tings for your program.
- Page 23 Buttons en Button Selection Description 1件 Activate Adjust the set pro- ¡ gramme with crease-re- Deactivate ¡ moval function 衬衫除皱 smartFinish . Observe the programme descrip- tion. → "Programmes", Page 25 Suitable for dry shirts and blouses that have not been worn for long or at all.
- Page 24 en Buttons Button Selection Description Up to 24 hours Set the programme end 预约 time. The programme duration is already included in the set number of hours. Once the programme has started, the pro- gramme duration is dis- played. Activate After you have washed 洗烘联动...
- Page 25 Programmes en Programmes 8 Programmes You can dry your fabrics using either an automatic programme or a timed pro- Programmes gramme. 8.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors Select the dryness level according ¡ measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
- Page 26 en Programmes Programme Description Max. load (kg) If you dry the pillows and the pillows ¡ are not completely dry at the end of the programme, dry the pillows with a timed programme. → "Timed programmes", Page 26 除菌 Antibacteria Dry hard-wearing, heat-resistant fabrics made of cotton or linen.
- Page 27 Programmes en Programme Description Max. load (kg) 羊毛 - 挂架 Wool - Dry items made of wool or containing One item Basket wool. of laundry Note: Dry these items only using the wool basket. → "Wool basket", Page 36 热风定时 Time Dry Dry all types of fabric except for wool and silk.
- Page 28 en Accessories Accessories 9 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 50. Order number Connection kit To save space, stack the WZ27510 appliance on a suitable washing machine of the same width and depth and that is from the...
- Page 29 Laundry en Requirement: The appliance has Laundry 10 Laundry been correctly installed and connec- ted. Laundry → "Installation and connection", 10.1 Preparing the laundry Page 12 Press . ATTENTION! ▶ Objects remaining in the laundry may The switch-on process takes a few damage the laundry and the drum. seconds.
- Page 30 en Basic operation Note: If "Hot" appears, the appliance 11.4 Saving the programme cools the laundry. settings When "Hot" goes out, the laundry has cooled down. You can save your individual pro- gramme settings as favourites. 11.7 Adding laundry Requirements A programme is set. ¡...
- Page 31 Basic operation en Remove the fluff from the recess. 11.11 Fluff filter During drying, fluff from the laundry is collected in the fluff filter. The fluff fil- ter protects the appliance from fluff. Cleaning the fluff filter If the drying programme has finished or the display shows a notification while the appliance is in operation, clean the fluff filter.
- Page 32 en Basic operation Remove the fluff. Insert the two-part fluff filter. Clean the two fluff filters thoroughly Close the door. under warm, running water and then dry them off. 11.12 Condensation con- tainer Condensation that forms in the appli- ance as it dries the laundry is collec- ted by default in the condensation container.
- Page 33 Dryness level en Pull out the condensation con- Inserting the condensation tainer, keeping it level. container Push the condensation container ▶ in as far as it will go. Empty the condensation container. Dryness level 12 Dryness level Each automatic programme has a Dryness level specified dryness level.
- Page 34 en Childproof lock 12.1 Changing the dryness Childproof lock 13 Childproof lock level Secure your appliance against being Childproof lock For some automatic programmes, operated unintentionally using the you can change the dryness level so controls. that your laundry will be drier or more damp.
- Page 35 Crease-removal function en with a crease-removal function for Remove the laundry immediately any dry laundry that has not been after the programme has ended to worn for long or at all. prevent creasing. Hang up the items of laundry and 14.1 Starting a programme pull them into shape.
- Page 36 en Wool basket Add approx. 180 ml cold mains Insert the feet of the wool basket water through the front opening, into the holes from the door open- using the water jug provided. ing. Check the water tank filter regu- Insert the tab on the front of the larly and clean the filter if it is dirty.
- Page 37 Wool basket en Place the laundry into the wool Tip: Increase the programme dura- basket, either directly or using the tion for thick or multi-layered items insert. of laundry. → "Examples of how to use the Start the programme → Page 30. wool basket", Page 37 Remove the wool basket once the programme has ended.
- Page 38 en Home Connect Home Connect services in your coun- Example try. You can find information about Sports shoes Lift the tongues this at: www.home-connect.cn. of the shoes. Remove the in- The Home Connect app guides you soles or heel through the entire login process. Fol- cushions.
- Page 39 Home Connect en 16.2 Setting up Home Con- 16.5 Installing the software nect update Note: If a software update is avail- Requirements The Home Connect app has been able, a message appears in the ¡ installed on your mobile device. Home Connect app. The appliance is receiving signals ¡ To install the software update, fol- ▶...
- Page 40 en Home Connect nect server and if Remote Dia- Deactivating remote start gnostics is available in the country in Press 手机互联 . ▶ which you are using the appliance. goes out. Tip: For further information and de- tails about the availability of Remote 16.8 Intelligent programme Diagnostics in your country, please recommendation...
- Page 41 Basic settings en Restore the appliance to the Basic settings 17 Basic settings factory settings (rES). You can configure the basic settings Basic settings 17.2 Changing the basic set- for your appliance to meet your tings needs. Note: You can also adjust the the ba- To call up the basic settings, press sic settings in the Home Connect 设置...
- Page 42 en Appliance care Preparing the condensation 18.3 Running the basic appli- container for the appliance care ance care programme programme To remove light dirt deposits in the If you drain the condensation from appliance, you can run the basic ap- the appliance using the drain hose, pliance care programme.
- Page 43 Appliance care en ation container and insert it into The appliance care programme the recess in the top of the con- starts and a signal tone sounds. After around 3 hours, the appli- densation container. → Page 42 ance pauses the appliance care Insert the condensation container programme and the remaining pro- so that it locks into place.
- Page 44 en Cleaning and servicing Insert the condensation container. Cleaning and servicing 19 Cleaning and servi- → Page 33 cing 19.2 Moisture sensor To keep your appliance working effi- Cleaning and servicing The moisture sensor in this appliance ciently for a long time, it is important measures how damp the laundry is to clean and maintain it carefully.
- Page 45 Cleaning and servicing en 19.3 Condensation container filter During drying, fluff from the laundry gets into the condensation. The filter in the condensation container pro- tects the appliance from fluff. Clean the filter for the condensation tank. The filter is cleaned automatically when the condensation container is emptied.
- Page 46 en Troubleshooting Troubleshooting 20 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶...
- Page 47 Troubleshooting en Fault Cause and troubleshooting The display and but- Software fault. tons do not respond. To restart the appliance, press and hold for ap- ▶ proximately 5 seconds. Home Connect is not Different causes are possible. working properly. Set up Home Connect again. → Page 38 ▶...
- Page 48 en Troubleshooting Fault Cause and troubleshooting The crease-removal A low ambient temperature extends the duration of the function takes too crease-removal function. long. No action required. Humming, whirring or Not a fault. The compressor, compressor ventilation or pumping noises. condensation pump is active. No action required.
- Page 49 Troubleshooting en Fault Cause and troubleshooting Creasing. Spread the items of laundry for cooling. Easy Care fabrics have been dried for too long. Change or adjust the dryness level. → Page 33 ▶ The crease-reduction function is not activated. Activate the crease-reduction function. → Page 21 ▶...
- Page 50 en Transportation, storage and disposal This appliance is la- Transportation, storage and disposal 21 Transportation, stor- belled in accordance age and disposal with European Directive 2012/19/EU concerning Transportation, storage and disposal used electrical and elec- 21.1 Disposing of old appli- tronic appliances (waste electrical and electronic ance equipment - WEEE).
- Page 51 Technical data en On the rear of the appliance. ¡ Safety – Part 1: General require- Make a note of your appliance's de- ments tails and the Customer Service tele- phone number to find them again GB 4343.1 Electromagnetic quickly. compatibility re- quirements for household appli- Technical data...
- Page 56 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG BSH Hausgeräte GmbH Carl-Wery-Straße 34, 81739 München, GERMANY 原产地：波兰 总经销商：博西家用电器（中国）有限公司 地址： 中国江苏省南京市鼓楼区清江南路18号3幢 客户服务热线：400 889 9999 客户服务电子邮箱： careline.china@bshg.com siemens-home.bsh-group.cn *9001938150* 9001938150 (040327)
Need help?
Do you have a question about the WQ56B2C00W and is the answer not in the manual?
Questions and answers