UltraLux ULWM-CT-1 User Manual page 18

Option 2: Drain line is installed
1
Press the "Flush" button to
initiate the 10 minute Flush
Cycle.
Make sure the tank is full to
the 4-liter mark.
Option 3: Blocking the drain line
1
Insert the included Quick
Connect Plug to block the
end of the Quick Connect
Elbow to block the drain
line.
18
2
While the machine is cycling,
add water to the tank as
needed.
2
Press the "Flush" button to
initiate the 10 minute Flush
Cycle.
Make sure the tank is full to
the 4-liter mark.
3
Dump the water out when
the cycle is completed and
rinse the tank thoroughly.
3
When the flush completes,
remove the plug , and empty
the water tank, rinsing it and
filling it back up with water.