UltraLux ULWM-CT-1 User Manual page 17

4
5
6
Initiate a Flush Cycle according to the following options:
Option 1: Drain line is not installed
1
Fill the Water Tank with
water until it has reached
the 4-liter mark.
Plug the machine back in and fill the tank in the
back to the 4-liter mark. This is crucial to ensure
an effective Flush Cycle.
Press and hold the "Reset" button until the
machine chimes.
2
Press the "Flush" button to
initiate the 10 minute Flush
Cycle.
3
Dump the water out when
the cycle is completed and
rinse the tank thoroughly.
17