Pyramid DIG-4B Operation Instructions page 3

PYRAMID DIG-4B, DIG-6B DIGITAL CLOCK
Operation Instructions
OPTIONAL SYNCHRONIZATION
The DIG-48 and DIG-68 standalone clocks are able to interface with any Pyramid Device with BCD output
to synchronize time to one or multiple clocks. Connection is made with an RJ45 cable to the BCD output
on the device.
ACCESSORIES
PART # DESCRIPTION
7000
43193-3
42689
CTPLATEKIT
41269
41314
41270
42429E-1
42247J
1-YEAR LIMITED WARRANTY
The manufacturer warranties this equipment to the original user against defective material or workmanship
for a period of one year from the date of purchase. The manufacturer's responsibility under this warranty
is limited to the repair or replacement of the defective part or parts.
The manufacturer reserves the right to determine whether the parts failed because of defective material,
workmanship, or other causes. Failure caused by accident, alteration, misuse or improper packaging
of returned unit is not covered by this warranty. All warranty repairs must be done by Pyramid Time
Systems, LLC. Any repair to the equipment other than Pyramid Time Systems voids the warranty. Users
in countries other than the USA should contact the Dealer from whom the unit was purchased. The rights
under this warranty are limited to the original user and may not be transferred to subsequent owners.
TECHNICAL SUPPORT
Should you need to speak live to one of our representatives, please call toll-free (US/Canada) at 888.479.7264
during regular business hours (8:30AM-5PM EST, M-F) or email: customer_support@ptitime.com
I2009 - REV H
TimeTrax Sync™ Master Clock Controller (BCD)
DIG-4B/DIG-6B Wire Guard Kit
Clear Washed Enclosure
Count UP/DOWN Digital Time Controller
RJ45 BCD Cable, 50'
RJ45 BCD Cable, 100'
RJ45 Y-Splitter Cable
Security Mount Replacement Key
Digital Security Mount Replacement Bracket
888.479.7264