Page 3
Series 2. How to replace ballscrew 2. Release lock nut bolts, and remove 1. Release rail cover bolts from the lock nut top, and remove the rail cover. 4. Remove ball screw from the end 3. After releasing end plate bolts, plate disassemble an end plate.
Page 4
Series 3. How to put grease 1. Remove rail cover bots from both 2. Check the amount of grease on side, and remove a cover. ballscrew and LM 3. Put grease in ballscrew nipple two 4. Put grease in LM block nipple two times(20cc for each time) by using grease times(20cc for each time) by using grease injector, and after each injection, operate...
Need help?
Do you have a question about the TRS Series and is the answer not in the manual?
Questions and answers