Advertisement
To avoid pinching do not lean on the massage mechanism in the cushion when adjusting your body position.
Do not jam or force any part of your body in the moving massage mechanism.
Connect the adaptor to the unit by plugging the input jack into the output jack, making sure to match the top side of each jack (see Fig. 1). Then plug the adaptor into a 120 volt AC outlet. Attach the cushion to most chairs for a luxurious massage as you read, rest or even work. See instructions on the use of the hand control.
The Full Back Massaging Cushion incorporates a unique strapping system which allows you to fasten it to almost any chair. Just slip the straps over the seat or chair and adjust fastening straps to secure. Your massager won't slip or slide away.
Figure 1
Please note: Not recommended for use on wooden surfaces as the zipper may damage the wood. Caution is also recommended when using on upholstered furniture.
NOTE: Only gentle force should be exerted against the unit in order to eliminate any/all risk of injury. You may soften massage force by placing a towel between yourself and the unit.
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed objects which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power cord around the unit. Do not hang the unit by the hand control cord.
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge. Never allow water or any other liquids to come into contact with the unit.
Moving Massage Mechanism
Massage Intensity & Activation
Press this button to activate the massage, an LED will illuminate behind the intensity level to confirm your selection. The default setting is High. Press the button again to change the intensity to Low. Press again to return to High.
Power Button
To turn on the massage functions, first press the POWER button. The LED indicator behind the word Power will illuminate and confirm your selection. To turn off the massage functions, simply press the button again.
Demo Button
For a brief demonstration of the features of this cushion, press the Demo button.
Direction Control
Press this button to change the direction of the massage mechanism. An LED will illuminate behind the direction arrow to confirm your selection.
Deep Tissue Massage
Two sweeping "arms" massage a large area of the back in one continuous motion to help lift, stretch and relax muscles.
Power Adaptor
This product is powered by a custom 120 volt AC adaptor, which is included with your unit.
NOTE: There is a 15-minute auto shut off on the unit for your safety.
HoMedics Service Center
1.800.466.3342
8:30–5:00 p.m. (EST)M–F
Mail To:
Consumer Relations
HoMedics
Service Center, Dept. 168
3000 Pontiac Trail
Commerce Township, MI 48390
e-mail: cservice@homedics.com
LIMITED TWO YEAR WARRANTY
To obtain warranty service on your HoMedics product, mail the product and your dated sales receipt (as proof of purchase), postpaid, to the following address:
HoMedics Consumer Relations
Service Center Dept. 168
3000 Pontiac Trail
Commerce Township, MI 48390
No COD's will be accepted.
For more information regarding our product line in the USA, please visit: www.homedics.com
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
TO REDUCE THE RISK OF ELECTROCUTION:
TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE OR INJURY TO PERSONS:
All servicing of this massager must be performed by authorized HoMedics service personnel only.
SAVE THESE INSTRUCTIONS
Please read all instructions carefully before operating.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the FBC-200 and is the answer not in the manual?
Questions and answers