Advertisement
Install the nano-SIM card
Note: We may have already inserted it for you.
The TP-Link deco 4G+ modem uses a nano-SIM card, in most cases, it will come preinserted into your device.
To insert the SIM card, find the SIM card slot at the bottom of the modem.
Insert the SIM card gently inside the SIM card slot as shown above until it "clicks" in.
Power on the modem
Use the power adapter provided to connect your TP-Link deco 4G+ modem into a power source. Wait 2 minutes for the modem to complete the boot up sequence.
About your modem
Please wait 2 minutes after connecting your TP-Link deco 4G+ modem to power. The indicators will turn on when the modem has successfully connected to a network.
- 4G Antenna ports
- Phone (optional)
- LAN
- LAN
- Power
- Reset button
- WiFi details
- SIM slot
- Indicator Light
Wi-Fi for your devices
Once the modem has connected to a network connection, you can connect devices such as your laptop, smart phone, tablet, etc. wirelessly via Wi-Fi to your TP-Link deco 4G+ modem to access the internet. Please refer to the label on the bottom of your TP-Link deco 4G+ modem where you will locate:
- The wireless Wi-Fi network name (Wi-Fi Name)
- Wireless password (Wi-Fi Password)
On your device, open the Wi-Fi (wireless) connection setting, look for the Wi-Fi name, select it and enter the Wi-Fi Password.
Cabled connections for devices
You can connect a computer, laptop, Smart TV, etc. via an ethernet cable to your modem. Use the provided ethernet cable. Plug one end of the cable into any of the two LAN ports (
) at the back of your TP-Link Deco 4G modem. Plug the other end of the cable directly into an Ethernet port of your computer, laptop, or other device as shown below:
Note: A cabelled connection is always recommended over a wireless connection, but it is not compulsory
Optional: Connecting your home phone
You can run a landline over your wireless connection, there is an upfront cost of $69.00 for a home phone adapter and a $23.00 monthly fee. Get in touch with our team to add a phone service. If you would like the service, please call, or email Wireless Nation. We can port your existing number. Do not disconnect your existing number until we have ported it.
Need further assistance? If you need further assistance, please email us at: support@wirelessnation.net or call 09 280 3672
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the deco 4G+ and is the answer not in the manual?
Questions and answers