TP-Link deco 4G+ Quick Installation Manual

Hide thumbs Also See for deco 4G+:

Download this manual

Quick

Installation Guide

TP-Link deco 4G+ Modem

STEP 1:

Install the nano-SIM card

Note:

We may have already inserted it for you.

The TP-Link deco 4G+ modem uses a

nano-SIM card, in most cases, it will come

preinserted into your device.

To insert the SIM card, find the SIM card slot

at the bottom of the modem.

Insert the SIM card gently inside the SIM

card slot as shown above until it "clicks" in.

Need help?

Do you have a question about the deco 4G+ and is the answer not in the manual?

Page 1 We may have already inserted it for you. Quick Installation Guide TP-Link deco 4G+ Modem The TP-Link deco 4G+ modem uses a nano-SIM card, in most cases, it will come preinserted into your device. To insert the SIM card, find the SIM card slot at the bottom of the modem.
Page 2 Power on the modem About your modem Please wait 2 minutes after connecting your TP-Link deco 4G+ modem to power. The indicators will turn on when the modem has successfully connected to a network. Use the power adapter provided to connect your TP-Link deco 4G+ modem into a power source.
Page 3 Deco is starting up. phone, tablet, etc. wirelessly via Wi-Fi Pulse Blue: to your TP-Link deco 4G+ modem to Deco is ready for setup, access the internet. or WPS is in progress. Please refer to the label on the bottom of...
Page 4 LAN ports ( ) at the back phone service. of your TP-Link Deco 4G modem. Plug the other end of the cable directly into an If you would like the service, please call, Ethernet port of your computer, laptop, or email Wireless Nation.