Download Print this page
Flair Poseidon Manual

Flair Poseidon Manual

Ottoman bed frame single/double

Advertisement

Quick Links

Flair Poseidon Ottoman Bed Frame
Single/Double
Up to 2 hour approx
Two person
assembly
assembly time
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Poseidon and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Flair Poseidon

  • Page 1 Flair Poseidon Ottoman Bed Frame Single/Double Up to 2 hour approx Two person assembly assembly time Page 1...
  • Page 2 Important Assembly Tip Before you begin, it's best to identify all of the parts and fittings to build your ottoman bed frame. We advise laying these out on the floor to check you have everything, and to familiarise yourself with all of the parts and fittings before building. Top Tip We recommend that you build your new ottoman bed frame in the room you'd like it to be located.
  • Page 3 Operating Your Ottoman Bed Frame Safely Caution, this ottoman bed frame uses a pressurised mechanism. Please ensure children and animals are kept away from the ottoman bed frame when operating the mechanism. Use caution when operating, and always use two hands at arm's length. You must always ensure the mattress is on the ottoman bed frame before lifting the mechanism.
  • Page 4 Parts Before you begin building your ottoman bed frame, please take a moment to read through the instructions and make sure that you have all the relevant parts listed on the parts check list. E(x30) Page 4...
  • Page 5 PART CHECK LIST     Headboard Bed Slats X2 Sets Lifting Mechanism X1 Sets        Side Metal Frame Footboard Side Panel-L Centre Support Rail Side Panel-R Fabric Base Centre Rail Wooden Block Front Metal Frame Centre Metal Bar Rear Metal Frame...
  • Page 6 Step 1 Step 2 Attach the strap (8) to the center, at the FB end. Step 3 Step 4 Attach the Gas Strut to the Lift mechanism. Page 6...
  • Page 7 Step 5 Step 6 Step 7 Step 8 Attaching the Lifting mechanisms on Part M. Attaching Lifting mechanisms to metal frame. Page 7...
  • Page 8 Step 9 Step 10 Attach the fabric Base (L) to bottom of the side rails, HB,FBwith velvro tape. Ensure the fabric is fixed evenly all round Step 11 Step 12 Page 8...
  • Page 9 Step 13 Step 14 E*15 Step 15 Step 16 E*15 Page 9...