Advertisement
Quick Links
Hardware
A
JCBC
M6 x 60mm
B
M6 x 15mm
Barrel Nut
Wood Dowel
C
M10 x 30mm
CSK
D
M4 x 25mm
M4
E
Allen Key
Assembly Instructions
Montana Captain Bed
ASSEMBLY TIPS
x 8
Remove hardware from box and sort by size to check that all hardware
and parts are present before assembling. Follow instructions below in
the proper sequence to ensure fast, easy and correct assembly.
x 8
WARNING !!
DO NOT FULLY TIGHTEN ALL BOLTS UNTIL ALL PARTS ARE IN PLACE.
x 4
FAILURE TO FOLLOW THIS INSTRUCTION MAY CAUSE THE BOLTS TO
BE MISALIGNED DURING THE ASSEMBLY.
x 24
Tool required for assembly :
* Allen Key ( supplied )
* Phillips Screwdriver
x 1
( not supplied )
1/3
Advertisement
Related Manuals for Flair Montana Captain Bed
Summary of Contents for Flair Montana Captain Bed
- Page 1 Assembly Instructions Montana Captain Bed Hardware ASSEMBLY TIPS JCBC M6 x 60mm Remove hardware from box and sort by size to check that all hardware and parts are present before assembling. Follow instructions below in the proper sequence to ensure fast, easy and correct assembly.
- Page 2 Assembly Instructions Montana Captain Bed Part in Box Part in Box Description Parts No Carton # HB. Panel FB. Panel Side Rail Bed Slats...
- Page 3 Assembly Instructions Montana Captain Bed JCBC M6 x 60mm M6 x 15mm Barrel Nut Wood Dowel M10 x 30mm x 24 M4 x 25mm Tighten the Bolts. When everything is put together tighten all the Bolts.
-
Page 4: Assembly Tips
Assembly Instructions Montana Captain Bed Hardware JCBC x 12 M6 x 60mm M4 x 25mm JCBC M6 x 35mm M3.5 x 16mm M6 x 15mm (Long) ASSEMBLY TIPS Allen Key Barrel Nut Remove hardware from box and sort by size to check that all hardware and parts are present before assembling. - Page 5 Assembly Instructions Montana Captain Bed Part in Box Description Description Parts No Parts No Carton # Carton # Bottom Support ( Mid. ) Bed Slats Drawer Face Front Panel Drawer Back Panel Back Panel Drawer Side Panel ( Left & Right )
- Page 6 Assembly Instructions Montana Captain Bed x 16 M3.5 x 16mm Caster JCBC M6 x 60mm JCBC M6 x 35mm M6 x 15mm (Long) Barrel Nut...
- Page 7 Assembly Instructions Montana Captain Bed JCBC M6 x 60mm M6 x 13mm (Short) Barrel Nut Wood Dowel M8 x 30mm JCBC M6 x 35mm M3.5 x 16mm Handle Screw M4 x 28mm Wood Handle...
- Page 8 Assembly Instructions Montana Captain Bed x 24 M4 x 25mm Minifix x 15 Housing (Short) Connecting x 15 Bolt (Short) (3x) (3x)
- Page 9 Assembly Instructions Montana Captain Bed Minifix x 12 Housing (Short) M4 x 25mm Handle Screw Connecting M4 x 28mm Bolt (Short) Wood Handle (3x) (3x)
Need help?
Do you have a question about the Montana Captain Bed and is the answer not in the manual?
Questions and answers
Barrel nut in too deep to screw bolt in. Cannon get nut out. Tried wd 40
To remove a barrel nut that is too deep to screw in a bolt on a Flair Montana Captain Bed, follow these steps:
1. Use an Allen Key or Screwdriver: Insert an Allen key or a flat-head screwdriver into the barrel nut's hole and try to rotate it to align it properly.
2. Push from the Opposite Side: If possible, use a thin object like a dowel or screwdriver to push the barrel nut back toward the surface.
3. Use Needle-Nose Pliers: If accessible, grip the barrel nut with needle-nose pliers and pull it out gently.
4. Tap It Out: If the nut is stuck, lightly tap the opposite side using a small hammer and a wooden dowel to push it back out.
5. Reposition and Align: Once removed, reposition the barrel nut correctly before reinserting the bolt.
Ensure that all parts are properly aligned before tightening the bolts to avoid misalignment issues.
This answer is automatically generated