aspenhome I3210-430-BCK Assembly Instructions Manual

aspenhome
ah
ITEM NO: I3210-430-BCK
I3210-431-BCK
I3210-402-BCK
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
WARNING! Before using this product, please read, understand, and follow these instructions. Failure to follow
each of these assembly instructions precisely may result in damage to the product and / or injury to the consumer.
I3210-430
I3210-402
I3210-430
I3210-402
HARDWARE LIST: I3210-402
Description
No.
Hanger Bolt Ø5/16" x 4"
A
Half Moon Washer Ø5/16"
B
Hex Nut Ø5/16"
C
D
Hex Wrench 13mm
E Wood Screw M4 x 1-1/4"
Page 1/4
Queen Poster HB
Queen Poster FB
Queen Side Rails
UNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS.
Option 1
I3210-431
Option 2
I3210-431
Quantity
Sketch
8 PCS
8 PCS
8 PCS
1 PC
12 PCS
FOR INDOOR USE ONLY
MADE IN VIETNAM
ASSEMBLY INSTRUCTIONS
R
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
All Beds need to be set up in the exact final
location so that after full assembly it will not
need to be moved. Moving the bed will cause
the support legs to move out of perpendicular
(90 degree), weaken the support system, and
may allow the bed to collapse.
COMPONENTS LIST: I3210-430
Description
No.
1
Headboard (HB)
2 Post
3
Finial
COMPONENTS LIST: I3210-402
Description
No.
1
Bed rails
2
Slats
COMPONENTS LIST: I3210-431
Description
No.
1 Footboard (FB)
2
Post
3 Finial
Support Leg (for slats)
4
Quantity
Sketch
1 PC
2 PCS
2 PCS
Quantity
Sketch
2 PCS
6 PCS
Quantity
Sketch
1 PC
2 PCS
2 PCS
6 PCS
07-23-2024