Advertisement
Quick Links
aspenhome
ah
ITEM NO:
I3046-400
I3046-401
I3046-402
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
WARNING! Before using this product, please read, understand, and follow these instructions. Failure to follow
each of these assembly instructions precisely may result in damage to the product and / or injury to the consumer.
I3046-400
I3046-402
HARDWARE LIST: I3046-400
Description
No.
Bolt Ø5/16" x 2-1/2"
A
Bolt Ø5/16" x 1-1/2"
B
Lock Washer Ø5/16"
C
Flat Washer Ø5/16" x 3/4"
D
Allen Wrench M4
E
HARDWARE LIST: I3046-402
Description
No.
Hanger Bolt Ø5/16" x 3"
F
Half Moon Washer Ø5/16"
G
Hex Nut Ø5/16"
H
I
Hex Wrench 13mm
J
Wood Screw #4 x 1-1/4"
Page 1/4
Queen Sleigh HB
Queen Sleigh FB
Queen Rails
UNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS.
I3046-401
Quantity
Sketch
8 PCS
4 PCS
12 PCS
12 PCS
1 PC
Quantity
Sketch
8 PCS
8 PCS
8 PCS
1 PC
12 PCS
FOR INDOOR USE ONLY
MADE IN VIETNAM
ASSEMBLY INSTRUCTIONS
R
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
All Beds need to be set up in the exact final
location so that after full assembly it will not
need to be moved. Moving the bed will cause
the support legs to move out of perpendicular
(90 degree), weaken the support system, and
may allow the bed to collapse.
COMPONENTS LIST: I3046-400
Description
No.
1
Headboard (HB)
2
Left Leg
3
Right Leg
4
Wood Stretcher
COMPONENTS LIST: I3046-402
Description
No.
1
Bed rail
2
Slat
COMPONENTS LIST: I3046-401
Description
No.
1
Footboard (FB)
Support Leg
2
Quantity
Sketch
1 PC
1 PC
1 PC
1 PC
Quantity
Sketch
2 PCS
6 PCS
Quantity
Sketch
1 PC
6 PCS
09-02-2024
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for aspenhome I3046-400
Summary of Contents for aspenhome I3046-400
- Page 1 Moving the bed will cause the support legs to move out of perpendicular (90 degree), weaken the support system, and may allow the bed to collapse. I3046-402 I3046-401 HARDWARE LIST: I3046-400 COMPONENTS LIST: I3046-400 Description Quantity Description Quantity...
- Page 2 ASSEMBLY INSTRUCTIONS ITEM NO: I3046-400 Queen Sleigh HB I3046-401 Queen Sleigh FB I3046-402 Queen Rails STEP 1: Lay the headboard face down on a soft surface. Attach the left leg and right leg to headboard by using 8 bolts (A), lock washers (C) and flat washers (D) with an allen wrench (E).
- Page 3 ASSEMBLY INSTRUCTIONS ITEM NO: I3046-400 Queen Sleigh HB I3046-401 Queen Sleigh FB I3046-402 Queen Rails STEP 3: Screw the bolts(F) into HB & FB. Make sure the slat bearer is in the LOWER position. Align the bolts with the holes in the end of side rails and attach the side rails to HB & FB using half moon washers(G) and hex nuts (H).Then use a hex wrench to tighten all the nuts.
- Page 4 ASSEMBLY INSTRUCTIONS ITEM NO: I3046-400 Queen Sleigh HB I3046-401 Queen Sleigh FB I3046-402 Queen Rails FUNCTIONALITY INSTRUCTION I3046-400 Powered USB Ports (1 Type A+1 Type C) for Charging on both sides I3046-402 I3046-401 Standard Queen bed Page 4/4 MADE IN VIETNAM...
- Page 5 ASSEMBLY INSTRUCTIONS ITEM NO: I3046-404 King Sleigh HB I3046-405 King Sleigh FB I3046-406 King Rails I3046-410 Cal King Rails Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment.
- Page 6 ASSEMBLY INSTRUCTIONS ITEM NO: I3046-404 King Sleigh HB I3046-405 King Sleigh FB I3046-406 King Rails I3046-410 Cal King Rails STEP 1: Lay the headboard face down on a soft surface. Attach the left leg and right leg to headboard by using 8 bolts (A), lock washers (C) and flat washers (D) with an allen wrench (E).
- Page 7 ASSEMBLY INSTRUCTIONS ITEM NO: I3046-404 King Sleigh HB I3046-405 King Sleigh FB I3046-406 King Rails I3046-410 Cal King Rails STEP 3: Screw the bolts(F) into HB & FB. Make sure the slat bearer is in the LOWER position. Align the bolts with the holes in the end of side rails and attach the side rails to HB & FB using half moon washers(G) and hex nuts (H).Then use a hex wrench to tighten all the nuts.
- Page 8 ASSEMBLY INSTRUCTIONS ITEM NO: I3046-404 King Sleigh HB I3046-405 King Sleigh FB I3046-406 King Rails I3046-410 Cal King Rails STEP 6: For Cal King bed, insert wood caps into the holes on headboard and footboard. For regular King bed, skip this step.
Need help?
Do you have a question about the I3046-400 and is the answer not in the manual?
Questions and answers