Headset Controls And Indicators - Plantronics VOYAGER PRO User Manual

Headset Controls and Indicators

Action
Powering on/off Press power on/off
button 2 seconds.
Check if headset is Tap call control button
powered on or volume + or - button.
Call answer/end Tap call control button.
Transfer a call from While on a call, press
headset to phone or call control button for
from phone to headset 1 second.
Reject call Press call control button
for 1 second during
incoming call.
8
dUrATIOn: TAP is under 1 second. PRESS is 1-4 seconds as directed.
Indicator LED Tone
On: blue glow for 2 seconds On: ascending tones
Off: red glow for 2 seconds Off: descending tones
Short blue flash None
None Single low tone followed
by low-low-high tones
None Single followed by
double low tones
None Single low tone
Action Indicator LED
Missed call Tap any button to Triple purple flash
clear indicator LED. every 10 seconds for 5
minutes or until cleared
Mute Press and hold None
(during a call) volume + and - buttons
simultaneously until you
hear status prompt.
Prompts only occur
during an active call.
Adjust the volume Tap volume + or - Single blue flash
(during a call) button.
WARNING Do not use headsets at high volumes for an extended period of time. Doing so can cause
hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more
information on headsets and hearing.
dUrATIOn: TAP is under 1 second. PRESS is 1-4 seconds as directed.
Headset Controls and Indicators
Tone
None
Mute on: sequence starts with the
high-low tones plus voice prompt
"Mute On" (in English). 15 minutes
later just the high-low tones advise
status. Full sequence repeats every
30 minutes until Mute is de-activated.
Mute off: high-low tones followed by
voice prompt "Mute Off" (in English).
Tone at each change in volume.
Double tone when min/max volume
level reached.
9