Page 3
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor MPG 321URXW QD-OLED Documentation Quick Start Guide Stand Stand Base with Screw(s)
Page 4
Installing the Monitor Stand 1. Leave the monitor in its protective packaging. Align the stand to the monitor groove. 2. Push the stand towards the monitor groove until it locks in place. 3. Connect the base to the stand and tighten the base screws to secure the base. 4.
Page 5
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. Important ⚠ Avoid touching the display panel when adjusting the monitor. ● Please slightly tilt the monitor backwards before pivoting it. ● -5° 15° 110 mm 10°...
Page 7
Cable Routing Hole Macro Key To activate OSD Application. Navi Key Power Button Kensington Lock Headphone Jack HDMI™ Connector Supports HDMI™ CEC, 3840x2160@240Hz as specified in HDMI™ 2.1. Important ⚠ To ensure optimal performance and compatibility, please use only HDMI™ cables certified with the official HDMI™...
Page 8
USB 2.0 Type-B Upstream Port For USB Upstream Cable. To Monitor Important ⚠ Check the package for USB Upstream Cable and connect it to the PC and monitor. Once this cable is connected, the USB Type-A To PC Downstream Ports on the monitor will be ready for use.
Page 9
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. (Figure A) 4. Plug the power cord into the electrical outlet. (Figure B) 5.
Page 10
OSD Setup This chapter provides you with essential information on OSD Setup. Important ⚠ All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/Down/Left/Right: ●...
Page 11
OSD Menus Important ⚠ The following settings will be grayed out when HDR signals are received: Night Vision Color Temperature ● ● Low Blue Light Optix Scope ● ● Brightness PIP/PBP ● ● Contrast A.I. Vision ● ● G.I. 1st Level Menu 2nd/3rd Level Menu Description Auto...
Page 12
1st Level Menu 2nd/3rd Level Menu Description Smart Crosshair Icon None ● Through AI algorithm, this function enhances the visibility of in-game crosshair. ● Users can select the color and position of the crosshair. Color White Auto Position Reset Optix Scope Scope Size Small ●...
Page 13
1st Level Menu 2nd/3rd Level Menu Description Night Vision ● This function optimizes background brightness and is recommended for FPS games. Normal Strong Strongest A.I. A.I. Vision ● A.I. Vision enhances image quality by optimizing the contrast of images and background brightness.
Page 14
1st Level Menu 2nd/3rd Level Menu Description ● Users can toggle DSC (Display Stream Compression) on/off. ● For more DSC timing information, please check Preset Display Modes for DSC On/Off timing tables. ● Activating DSC will affect: Affected Function Function Status »...
Page 15
Image 1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100 ● Properly adjust Brightness according to the surrounding lighting. Contrast 0-100 ● Properly adjust Contrast to relax your eyes. Sharpness ● Sharpness improves clarity and details of images. Color Temperature Cool ●...
Page 16
PIP/PBP 1st Level Menu 2nd/3rd Level Menu Description ● PIP (Picture in Picture) allows users to simultaneously display multiple video sources Source HDMI™ 1 on one screen. One program is displayed on the full screen at the same time as one or more HDMI™...
Page 17
Navi Key 1st Level Menu 2nd Level Menu Description ● All Navi Key items can be adjusted via OSD Menus. Down Brightness Left Game Mode Right Smart Crosshair Alarm Clock Input Source PIP/PBP Mode Refresh Rate Info. On Screen Night Vision Optix Scope Settings 1st Level Menu...
Page 18
2nd Level Menu Description RGB LED ● Users can adjust RGB LED to ON or OFF. MSI - Mystic Light RGB Brightness Power Button ● When set to OFF, users can press the power button to turn off the monitor.
Page 19
1st Level Menu 2nd/3rd Level Menu Description Panel Protect ● To maintain panel image quality, panel protect (short time) function will automatically activate when monitor using over 4 hours. ● This protect function may take several minutes to complete. ● The power indicator will blink orange color until process done.
Page 20
● 3 : 20% reduction ● Reducing effect depends on Brightness/ DisplayHDR setting. OLED Panel Info. ● This field shows the information of MSI OLED Care. * HDMI™ VRR (Variable Refresh Rate) synchronizes with Adaptive-Sync (ON/ OFF). For VRR ON/OFF status, please check Adaptive-Sync.
Page 21
Specifications Monitor MPG 321URXW QD-OLED Size 31.5 inch Curvature Flat Panel Type QD-OLED Resolution 3840x2160 (UHD) 16:9 Aspect Ratio ● Typical SDR: 250 nits Brightness ● Peak HDR: 1000 nits Contrast Ratio 1500000:1 240Hz Refresh Rate Response Time 0.03ms (GTG) ●...
Page 22
Monitor MPG 321URXW QD-OLED ● Plate Type: 100 x 100 mm ● Screw Type: M4 x 10 mm VESA Mounting ● Thread Diameter: 4 mm ● Thread Pitch: 0.7 mm ● Thread Length: 10 mm Dimension (W x H x D) 718 x 483 x 242 mm 9.6 kg...
Page 23
Preset Display Modes Important ⚠ All information is subject to change without prior notice. Standard Mode Standard Resolution HDMI™ USB-C 2560x1440 @60Hz @120Hz 3840x2160 @60Hz @120Hz @180Hz @240Hz Video Timing Resolution 720P 1080P @60Hz 1080P @120Hz 2160P @30Hz 2160P @60Hz 2160P @120Hz HDMI™...
Page 24
PBP Mode 1 (Not Support HDR) Standard Resolution HDMI™ USB-C Video Timing Resolution 720P Used for PBP Full Screen 960x2160 @60Hz 2880x2160 @60Hz PBP Mode 2/ Customize (Not Support HDR) Standard Resolution HDMI™ USB-C Video Timing Resolution 720P Used for PBP Full Screen 1920x2160 @60Hz Screen Size 16:10 (Not Support...
Page 25
Troubleshooting The power LED is off. ● Press the monitor power button again. ● Check if the monitor power cable is properly connected. No image. ● Check if the computer graphics card is properly installed. ● Check if the computer and monitor are connected to electrical outlets and are turned on.
Page 26
● Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ● If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 27
● If any of the following situations arises, get the device checked by service personnel: ● The power cord or plug is damaged. ● Liquid has penetrated into the device. ● The device has been exposed to moisture. ● The device does not work well or you can not get it working according to the User Guide.
Page 28
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
Page 29
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 30
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
Page 32
HDMI™ Logos are trademarks or registered trademarks of HDMI™ Licensing Administrator, Inc. Technical Support If a problem arises with your product and no solution can be obtained from the user’ s manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.
Need help?
Do you have a question about the MPG 321URXW QD-OLED and is the answer not in the manual?
Questions and answers