Advertisement
Quick Links
ColorFlood Square
SS2-RGBW-10S-24
24-LED Adjustable RGBW
Square Flood/Spot DMX Light
The SS2 Series are active, top-of-the-line RGBW color changing fixtures that can be used in indoor or outdoor projects. They
draw on solid-state elements, to produce highlights and washes in architectural spaces. RGBW is an acronym for Red Green
Blue and White. RGBW LED color mixing luminaires have the potential to produce 4.3 billion colors and 16.7 million white
light tones.
When installed and operated according to this manual, these fixtures will operate safely and dependably for their rated
lifespan.
These luminaries require a USITT DMX 512 control signal on four consecutive channels total. The unit includes a DATA OUT
output for connection to additional units or other DMX512 devices.
SCOPE
The purpose of this manual is to show proper use and installation of color-changing flood lights for peak performance. This
manual must be complimented by additional references, consultation from qualified professional(s), and observance of state
and local codes and regulations. This rule applies to any interior structure, exterior structure, or environment.
Therefore, it is important to: please read and comply with all instructions and warnings in this manual when installing or
using this product.
THIS MANUAL INTENDED FOR electrical contractors, electrical engineers, and licensed electricians.
ADDITIONAL SUPPLY OPTIONS
•
DMX512 compatible controller (optional)
•
DMX extension (optional)
•
DMX feed connector
•
4x4 inch electrical junction box rated for the application (optional)
•
Controller (DMX512 compatible)
•
Proper mounting bolts, washers, and lock washers to secure the fixture to the mounting surface
SAFETY HAZARD ICON KEY
DANGER = avoiding
WARNING = avoiding this warning may result may in serious injury or death.
CAUTION = not exercising caution may result in minor to moderate injury, or property damage.
INSTRUCTIONS
pending
danger will result in serious injury or death.
1
|
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Coloronix ColorFlood Square SS2-RGBW-10S-24
Summary of Contents for Coloronix ColorFlood Square SS2-RGBW-10S-24
- Page 1 ColorFlood Square INSTRUCTIONS SS2-RGBW-10S-24 24-LED Adjustable RGBW Square Flood/Spot DMX Light The SS2 Series are active, top-of-the-line RGBW color changing fixtures that can be used in indoor or outdoor projects. They draw on solid-state elements, to produce highlights and washes in architectural spaces. RGBW is an acronym for Red Green Blue and White.
- Page 2 CAUTION: Do not look directly into beam, with or without optical instruments. Note: Instructions and warning referenced in this installation guide are not necessarily all-inclusive, all conceivable, or all relevant to all applications as Coloronix by Nova Flex cannot anticipate all conceivable or unique situations PLANNING FOR INSTALLATION Unpacking: Use the packing list to ensure all accessories are included.
- Page 3 INSTRUCTIONS SS2-RGBW-10S-24 SETTING COLOR MODE For installations requiring DMX control, set the personalized DMX address on the LCD menu (pictured at right) using the address table below. Note: Up to 128 unique 4-channel addresses can be set per DMX universe. The factory default setting for this unit is 4-channels.
- Page 4 INSTRUCTIONS SS2-RGBW-10S-24 084-090 R (0) G (255) B (50) W (0) 091-097 R (0) G (255) B (150) W (0) 098-104 R (0) G (255) B (255) W (0) 105-111 R (0) G (255) B (255) W (75) 112-118 R (0) G (255) B (255) W (150) 119-125 R (0) G (100) B (255) W (255) 126-132...
- Page 5 INSTRUCTIONS SS2-RGBW-10S-24 Auto Mode: Press the setup button to enter, choose YES. Lights will run according to the speed and strobe of built-in Program Mode:02-Program Mode:14 Built-In Program: There are 16 built-in programs. Press the setup button to enter and ‘UP’ or ‘DOWN’ button 00-33 Color Mode:01...
- Page 6 INSTRUCTIONS SS2-RGBW-10S-24 4. DMX Sync – In the DMX mode, several fixtures can also operate at the same step, even with no DMX control for a period of time. Please press the setup button to enter and select by the ‘UP’ or ‘DOWN’ button: DMX Sync 5.
- Page 7 INSTRUCTIONS SS2-RGBW-10S-24 RDM (Remote Device Management) This product supports RDM communication protocol. RDM is a protocol that supports two-way traffic in the standard DMX512 protocol. RDM controls devices and configurations, and detects lights, changing the DMX address of the fixture, DMX mode, etc.
- Page 8 INSTRUCTIONS SS2-RGBW-10S-24 MENU INFO REFERENCE TABLE Menu 1 Menu 2 Menu 3 Description 1. Address 001 - 512 DMX Address 1: DMX 2. Channels 4/6/10 - CH DMX Mode 000 - 255 Green 000 - 255 2: Dimmer Dimming mode Blue 000 - 255 White...
- Page 9 INSTRUCTIONS SS2-RGBW-10S-24 MOUNTING AND ALIGNMENT OF FIXTURE 1. Mount and secure each fixture into the designated position in accordance to the installation plan. Ensure there is sufficient cable length between the fixture and junction box to allow for final alignment of the fixture. 2.
- Page 10 TROUBLESHOOTING If problems occur during usage, unplug the product immediately and email cs@coloronix.com or call 1.800.515.4880. Replacing a Failed Fixture: “Hot Swapping” a fixture is not allowed. If a fixture needs to be replaced, the steps are to: 1.
Need help?
Do you have a question about the ColorFlood Square SS2-RGBW-10S-24 and is the answer not in the manual?
Questions and answers