Page 3
Table of contents Table of contents General information..........................5 1.1 Further information........................... 6 1.2 Notational conventions........................6 1.3 Symbols and signal words....................... 7 Safety instructions............................. 9 Features............................... 13 Installation..............................14 Connections and controls........................18 Technical specifications........................24 Cleaning............................... 26 Protecting the environment......................27 WUFSL FX Box LED Effect...
Page 5
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. WUFSL FX Box...
Page 6
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of Keyword search interest for you quickly.
Page 7
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
Page 8
General information Warning signs Type of danger Warning – high-voltage. Warning – laser radiation. Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone. WUFSL FX Box LED Effect...
Page 9
Safety instructions Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology and for the projection of laser light effects. The device is designed for professional use only and is not suitable for use in households.
Page 10
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices.
Page 11
Safety instructions WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. NOTICE! Laser radiation – risk of fire Keep the area exposed to laser radiation free from flammable substances. NOTICE! Risk of fire Do not block areas of ventilation.
Page 12
Safety instructions NOTICE! Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used. NOTICE! Risk of fire due to incorrect polarity Incorrectly inserted batteries may destroy the device or the batteries.
Page 13
Features Features The LED effect is suitable for almost any application, for example in clubs, bars, and party rooms. The two laser diodes together with the LED lighting ensure extraordinary effects. Special features of the device: 5-in-1 light effect Control via the supplied IR remote control Laser diodes: –...
Page 14
Installation Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Page 15
Installation Minimum height In order to meet the limits for maximum irradiation (MZB limit value for the non-hazardous irradiation of the eye or the skin with a laser), the device must be installed at a height of at least 2.7 m according to the DGUV V11 valid in Germany. The determination of the MZB limit values depends on the specific environmental conditions in individual cases and must be carried out by the responsible laser protection representative on site, based on the applicable standard DIN EN 60825-1.
Page 16
Installation NOTICE! Risk of overheating The distance between the light output and the illuminated surface must be more than 2.0 m (78.7 in). Always ensure sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). Please note that this device must not be connected to a dimmer. WUFSL FX Box LED Effect...
Page 17
Installation Inserting the battery into the Press the lock of the battery holder to the centre of the housing and pull out the battery holder remote control like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing base of the remote control.
Page 18
Connections and controls Connections and controls Front panel & ö & WUFSL FX Box LED Effect...
Page 19
Connections and controls 1 Mounting bracket 2 Locking screw for the mounting bracket 3 LED for the waterfall effect 4 Infrared sensor for the remote control signals 5 LEDs for UV and strobe effect 6 LED for the rays effect 7 Laser aperture.
Page 20
Connections and controls Rear panel WUFSL FX Box POWER IN: 100-240V~50/60Hz FUSE:T1.6AL250V WUFSL FX Box LED Effect...
Page 21
Connections and controls 8 IEC chassis plug for the mains cable with fuse holder 9 Selector switch for the operating mode Set the selector switch to [AUTO] to activate the automatic mode. Set the selector switch to [SOUND] to activate the sound-controlled mode. 10 Microphone for sound-controlled operation 11 Safety cable eyelet WUFSL FX Box...
Page 22
Connections and controls Remote control ON/OFF Auto Sound Laser Flash MOTOR SPEED IRC REMOTE WUFSL FX Box LED Effect...
Page 23
Connections and controls 12 [ON/OFF] | main switch, turns the device on and off. 13 [AUTO] | activates the Auto mode 14 [SOUND] | activates the sound-controlled operation 15 Effect buttons [LED] | activates the rays effect [Laser] | activates the green and red laser diode [LS] | activates the waterfall effect [UV] | activates the UV effect [Flash] | activates the strobe effect...
Page 24
Technical specifications Technical specifications Laser medium Red: 650 nm Green: 532 nm Laser power Red: 100 mW Green: 30 mW Laser classification acc. to 277 mm EN 60825-1 2015 Light source Waterfall effect: 1 × RGBW LED, 5 W Rays effect: 1 × RGB LED, 6 W UV and strobe effect: 4 ×...
Page 25
Technical specifications Protection class IP20 Mounting options hanging, standing Dimensions (W × H × D), 277 mm × 150 mm × 170 mm w/o bracket Weight 2 kg Ambient conditions Temperature range 0 °C…40 °C relative humidity 20 %…80 % (non-condensing) Further information Similar construction...
Page 26
Cleaning Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device.
Page 27
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Page 28
Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility.
Need help?
Do you have a question about the Fun Generation WUFSL FX Box and is the answer not in the manual?
Questions and answers