Advertisement
Quick Links
Advertisement
Related Manuals for Aspire GENESIS HD
Summary of Contents for Aspire GENESIS HD
- Page 1 GENESIS HD Seat Walker USER MANUAL...
- Page 2 1. Intended Use 2. Product Description Congratulations and thank you for choosing this Aspire Genesis HD Seat Walker. 3. Symbols Used in This Manual This user manual contains a description of the product and 4. Symbols Used on the Product important guidelines to ensure correct and safe use.
- Page 3 1. INTENDED USE 4. SYMBOLS USED ON THE PRODUCT Aspire Genesis HD Walkers are specifically designed for individuals who, GENESIS HD WALKER due to a wide variety of reasons, require additional support while walking. This walker is designed for indoor and limited outdoor use. When used...
- Page 4 5. WARNINGS WARNING! This User Manual must be read before using the WARNING! The walker must not be driven or pushed with force walker. The manufacturer does not take any responsibility for when the parking brakes are on or when the wheels are partly damage and/or injuries caused by the fact that the User Manual locked using the brakes.
- Page 5 SAFE WORKING LOAD (SWL) 204kg 32.1st Overall Height 875 - 1050 / 34.4 - 41.3 Genesis HD Seat Walker mm/inch DO NOT exceed the safe working load on the walker. Overall Length 700 - 800 / 27.6 - 31.5 •...
- Page 6 7. LIST OF COMPONENTS 8. INSTRUCTIONS FOR USE Aspire Genesis HD Walkers are supplied in boxes and come folded, for INITIAL CHECK easier transportation. In the first instance remove the walker from the box and check the contents GENESIS HD WALKER (using the picture below) to ensure nothing is missing.
- Page 7 REAR WHEELS ASSEMBLY BACKREST ASSEMBLY 1. Insert rear wheel frame into the base frame, ensuring that the spring- 1. Align backrest with receiver mounts on handle tubes loaded button correctly aligns with the base frame 2. Push down and slide the backrest into place on both sides. 2.
- Page 8 FOLDING/UNFOLDING THE WALKER SITTING ON THE WALKER 1. Grab the bar below the seat (refer to picture ) and pull up towards you. • Ensure the hand brakes have been engaged. 2. Bring the front and back of the walker together (refer to picture •...
- Page 9 MAINTENANCE SCHEDULE WARNING! Avoid reaching or leaning outside the walker frame and base of support. To ensure the upright stability of the walker, never reach/lean for objects as this changes the centre of mass and may • Check brake function cause the walker to tip over in the direction of reaching/ leaning or WARNING •...
- Page 10 10. RECYCLING INFORMATION 13. MANUFACTURER If you have any questions, you can contact: Aspire Genesis HD walker is made from metal and plastic components, and it can be recycled through standard processes in your city of use. Manufacturer: Aidacare Pty Ltd ABN 40 134 398 833...
- Page 11 AIDACARE PTY LTD Building 3A, 1 Moorebank Avenue, Moorebank NSW 2170 Australia 1300 133 120 | aidacare.com.au MADE IN PRC ASUM107.18 180924...
Need help?
Do you have a question about the GENESIS HD and is the answer not in the manual?
Questions and answers