Advertisement
DRUM WHEEL BRAKE KIT
QUICK INSTALLATION GUIDE
This guide is intended to explain the correct set up procedure for the Drum Wheel Brake
Kit for the Aspire Evoke 2 Wheelchair.
For further operating instructions, refer to the product User Manual.
CODE
DRUM BRAKES
WCA848510
Rear Wheels w/ Drum Brakes Kit - 16in
WCA848520
Rear Wheels w/ Drum Brakes Kit - 20in
WCA848500
Rear Wheels w/ Drum Brakes Kit - 24in
Tools Required:
Carton Contents:
2x
Long Bolts
2x
Small Silver
Spacers
INSTALLATION GUIDE
Removing Camber Kit
1
1.
Remove quick release axle from wheelchair by pushing in spring button and pulling wheel outwards.
1
2.
Lay the wheelchair on its side, remove camber kit from wheelchair frame using a 24mm spanner.
2
1300 133 120
www.aspirecare.com.au
DESCRIPTION
24mm
Spanner
2x
Small Black
Nuts
2x
Large Silver
Spacers
Evoke 2
—
—
10mm
5mm
Spanner
Allen Key
2x
Sets of Rear Wheels &
Quick Release Axles
2
SUITS
Evoke 2 JNR
Rehab RX JNR
Rehab RX
—
—
O - Comes as Standard Feature
4mm
Allen Key
2x
Sets of Drum Brakes With
Handle & Brake Attached
Rehab RS
Advertisement
Table of Contents
Related Manuals for Aspire WCA848510
Summary of Contents for Aspire WCA848510
- Page 1 DRUM WHEEL BRAKE KIT QUICK INSTALLATION GUIDE This guide is intended to explain the correct set up procedure for the Drum Wheel Brake Kit for the Aspire Evoke 2 Wheelchair. For further operating instructions, refer to the product User Manual. SUITS...
- Page 2 Installing Drum Brakes LEFT SIDE RIGHT SIDE THIS WAY UP THIS WAY UP CABLE PIN CABLE PIN i i i Ensure the direction of the brake kit is facing upwards towards the top of the wheelchair. Remove nut and washer , Slide drum brake through hole Stand wheelchair back onto it’s wheels (from side lying position) ensuring cable pin stays pointing towards the top of the wheelchair.
Need help?
Do you have a question about the WCA848510 and is the answer not in the manual?
Questions and answers