Page 1
Model 505 OPERATING MANUAL Product Overview The Model 505 is a linear amplifier designed to drive a number of different Conoptics Electro- Optic Modulators. The amplifier is AC coupled and is designed to accept bipolar input signal formats. ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145 Email: sales@conoptics.com, or visit...
Page 2
This equipment is designed for general laboratory use. It is intended to be used with a number of Conoptics Electro-Optic Modulators only. The Model 505 amplifier is designed to drive a 50 ohm, Single Ended Line. Any use other than in direct connection with supplied optical modulators can result in severe damage to the amplifier.
Page 3
Designed for laboratory use (indoor only) Temperature range +5deg C to +50deg C ambient Humidity 20%-80% RH up to 32deg C, Altitude <3000M Weight 25lbs (11.34kg) ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145 Email: sales@conoptics.com, or visit www.conoptics.com...
Page 5
RF Load Input: Do not Exceed “0” DBM ( 626mV P to P ) Note: If Phase Modulator (No Bias) Short BNC 505 Amplifier ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145 Email: sales@conoptics.com, or visit www.conoptics.com...
Page 6
Model 505 Electronics ConOptics, Inc. 19 Eagle Road, Danbury, CT 06810 Phone 800-748-3349 Fax 203-790-6145 Email: sales@conoptics.com, or visit www.conoptics.com...
Need help?
Do you have a question about the 505 and is the answer not in the manual?
Questions and answers