NAD T 747 Owner's Manual page 20

OPERATION
USING THE T 747 – SETUP MENU
3 At "A/V Presets" page, set "Preset: 1" to the following conditions:
Use [ ] to select "Yes" or "No" and press [ENTER] to confirm selection
and move on to the next setting
While at "Save Current Setup to Preset" menu line, use [
above settings to Preset 1. Below OSD will be shown, affirming that the
above settings are now saved to "Preset 1".
When you recall "Preset 1" using the remote control (for AVR 3, "A/V PSET" + "1"),
the above preset values allocated at "Preset 1" (preset settings as shown in the
OSD captures at Step 1) will be recalled and effected at the current source.
20
4 Now, repeat again Step 1 above but this time with the following settings
Listening Mode: PLIIx Music
DSP Options: 0 ms
] to save the
Tone Controls: Tone Defeat: Off
Front Panel Display Setup: Set "Line 2" to "Volume"