APRILIA RS 125 TUONO - 2003 Manual page 210

RS 125 Tuono_Ing_book_my03.book Page 18 Tuesday, April 29, 2003 3:11 PM
VBAT (battery voltage)
N By pressing the push button for the
second time, the battery voltage (10), ex-
pressed in volt, is indicated on the di-
splay.
The recharge system functions properly if
at 4000 rpm the battery voltage, with low
beam on, is included between 13 and 15 V.
The current time (11) appears in the lower
part of the display.
18
use and maintenance RS 125 Tuono
TIME (setting hour/minutes)
N By pressing the push button for the
third time, the hour and minutes (12) are
displayed.
N To change the time data, proceed as fol-
lows:
N Press the push button and the num-
ber indicating the hours will start blinking.
N To increase the value, press the
push button.
N To set the minutes, press the
button and the number indicating the mi-
nutes will start blinking.
To increase the value, press the
N
push button.
Now, to store the setting of the hour and
minutes.
N Press the central push button.
LAP TIME (chronometer)
N By pressing the push button for the
fourth time, the "LAP TIME" (13) function
is displayed, which makes it possible to
time each lap with the vehicle on the track
and to store the data in order to be able to
consult them successively.
push