Hitachi CP-X2510E User Manual

Hide thumbs

page of 65

/ 65
Bookmarks

Quick Links

Download this manual

Projector

CP-X2010/CP-X2510/CP-X3010

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

WARNING

product. Be sure to read "Safety Guide" ﬁrst. After reading them, store them in a

safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are

described below.

WARNING

CAUTION

NOTICE



NOTE

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

Trademark acknowledgment

• Mac

is a registered trademark of Apple Inc.

• Windows

is a registered trademark of Microsoft Corporation in the U.S. and/or

other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.

All other trademarks are the properties of their respective owners.

►Before using this product, please read all manuals for this

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.

This entry notices of fear of causing trouble.

Please refer to the pages written following this symbol.

Need help?

Do you have a question about the CP-X2510E and is the answer not in the manual?

Questions and answers

Summary of Contents for Hitachi CP-X2510E

Page 1 Projector CP-X2010/CP-X2510/CP-X3010 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” ﬁrst. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual.
Page 2 Contents Contents   About this manual ... 1 PICTURE menu ... . 26 Contents ....2 RIGHTNESS ONTRAST AMMA...
Page 3 Projector features / Preparations Projector features The projector provides you with the broad use by the following features.  This projector has a variety of I/O ports that supposedly cover for any business scene.  This projector realizes the large projection image, even if in a small space. ...
Page 4 Part names Part names Projector HOT! (2) (3) (1) Lamp cover (53) The lamp unit is inside. (2) Focus ring (18) (11) (3) Zoom ring (18) (4) Control panel (5) (5) Elevator buttons (x 2) (18) (6) Elevator feet (x 2) (18) (10) (7) Remote sensor (12) (8) Lens (57)
Page 5 Part names Control panel (1) STANDBY/ON button (14) (2) INPUT button (15, 22) (3) MENU button (22) It consists of four cursor buttons. (4) POWER indicator (11, 14, 59) (5) TEMP indicator (59) (6) LAMP indicator (59) Rear panel (9) (1) AUDIO IN1 port (8) USB port (13) (2) AUDIO IN2 port...
Page 6 Part names Remote control (1) VIDEO button (16) (10) (2) COMPUTER button (16) (3) SEARCH button (17) MY SOURCE/ VIDEO COMPUTER DOC.CAMERA (4) STANDBY/ON button (14) ASPECT AUTO SEARCH BLANK (16) (12) (5) ASPECT button (17) PAGE VOLUME MAGNIFY FREEZE (14) (6) AUTO button (19) DOWN...
Page 7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%)
Page 8 Setting up Arrangement (continued) WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector. Using a damaged projector could then result in ﬁre and/or electric shock.
Page 9 Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
Page 10 Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution.
Page 11 Setting up Connecting power supply Put the connector of the power cord into the AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.
Page 12 Holding the hook part of the battery cover, remove it. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. Replace the battery cover in the direction of the arrow and snap it back into place.
Page 13 Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal MY SOURCE/ frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK does not function properly, attempt to change the signal frequency. MAGNIFY FREEZE PAGE...
Page 14 Power on/off Power on/off Turning on the power STANDBY/ON button POWER indicator Make sure that the power cord is ﬁrmly and correctly connected to the projector and the outlet. Make sure that the POWER indicator is steady orange (59). Then remove the lens cover.
Page 15 Operating Operating Adjusting the volume VOLUME +/- button Use the VOLUME +/VOLUME - buttons to adjust the volume. MY SOURCE/ A dialog will appear on the screen to aid you in adjusting the VIDEO COMPUTER DOC.CAMERA AUTO ASPECT SEARCH BLANK volume.
Page 16 Operating Selecting an input signal (continued) Press COMPUTER button on the remote control. COMPUTER button Each time you press the button, the projector switches its input port from the current port as below. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA COMPUTER IN 1  COMPUTER IN 2 ASPECT AUTO SEARCH...
Page 17 Operating Searching an input signal SEARCH button Press SEARCH button on the remote control. The projector will start to check its input ports as below in MY SOURCE/ VIDEO COMPUTER DOC.CAMERA order to ﬁnd any input signals. AUTO ASPECT SEARCH BLANK PAGE VOLUME...
Page 18 Operating Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the 14°...
Page 19 Operating Using the automatic adjustment feature AUTO button Press AUTO button on the remote control. Pressing this button performs the following. MY SOURCE/  For a computer signal VIDEO COMPUTER DOC.CAMERA AUTO ASPECT SEARCH BLANK The vertical position, the horizontal position and the horizontal MAGNIFY FREEZE PAGE...
Page 20 Operating Correcting the keystone distortions KEYSTONE button Press KEYSTONE button on the remote MY SOURCE/ control. A dialog will appear on the screen to VIDEO COMPUTER DOC.CAMERA AUTO ASPECT SEARCH BLANK aid you in correcting the distortion. MAGNIFY FREEZE PAGE VOLUME Use the ▲/▼...
Page 21 Operating Temporary freezing the screen FREEZE button Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen (however, MY SOURCE/ COMPUTER VIDEO DOC.CAMERA the indication will not appear when the OFF is selected for ASPECT AUTO SEARCH...
Page 22 Operating Using the menu function This projector has the following menus: MY SOURCE/ COMPUTER VIDEO DOC.CAMERA PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, SECURITY and ASPECT AUTO SEARCH BLANK EASY MENU. EASY MENU consists of functions often used, and the other menus are classiﬁed PAGE VOLUME MAGNIFY...
Page 23 Operating Using the menu function (continued) To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ●...
Page 24 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description Using the ◄/► buttons switches the mode for aspect ratio. ASPECT See the ASPECT item in IMAGE menu (29).
Page 25 EASY MENU Item Description Using the ◄/► buttons turns off/on the eco mode. ECO MODE See the ECO MODE item in SETUP menu (34). Using the ◄/► buttons switches the mode for mirror status. MIRROR See the MIRROR item in SETUP menu (35). Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE.
Page 26 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 27 PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. 1 HIGH 1 CUSTOM 2 MID 2 CUSTOM    6 CUSTOM 3 LOW 6 Hi-BRIGHT-3 3 CUSTOM 5 CUSTOM 5 Hi-BRIGHT-2 4 CUSTOM 4 Hi-BRIGHT-1 ...
Page 28 PICTURE menu Item Description This item is available only for CP-X2510 or CP-X3010. Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION  THEATER  OFF ACTIVE IRIS PRESENTATION : The active iris displays the best presentation image for both bright and dark scenes.
Page 29 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 30 IMAGE menu Item Description Using the ◄/► buttons adjusts the horizontal phase to eliminate ﬂicker. Right  Left H PHASE • This item can be selected only for a computer signal or a component video signal. Using the ◄/► buttons adjusts the horizontal size. Small ...
Page 31 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 32 INPUT menu Item Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. S-VIDEO  VIDEO (2) Using the ◄/► buttons switches the mode for video format. VIDEO FORMAT AUTO ...
Page 33 INPUT menu Item Description The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
Page 34 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 35 SETUP menu Item Description Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL  H:INVERT  V:INVERT  H&V:INVERT If the Transition Detector is on and MIRROR status is changed, TRANSITION DETECTOR ON alarm (50) will be displayed when projector is restarted after the AC power is turned off.
Page 36 AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.
Page 37 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 38 SCREEN menu Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.
Page 39 SCREEN menu Item Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON  OFF When the ON is selected, the item MyScreen is locked. Use this MyScreen Lock function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu (48).
Page 40 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼...
Page 41 SCREEN menu Item Description The C.C. is the function that displays a transcript or dialog of the audio portion of a video, ﬁles or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C.
Page 42 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME.
Page 43 OPTION menu Item Description Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes)  Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically. AUTO OFF When the time is set to 1 to 99, and when the passed time with no- signal or an unsuitable signal reaches at the set time, the projector...
Page 44 OPTION menu Item Description This item is to assign one of the following functions to MY BUTTON 1/2 on the remote control (6). (1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY BUTTON - (1/2) and press the ► button to display the MY BUTTON setup dialog.
Page 45 OPTION menu Item Description Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
Page 46 OPTION menu Item Description KEY LOCK Using the ▲/▼ buttons turns on/off the lens lock feature. When ON is selected, the buttons on the projector except the STANDBY/ON button are locked. ON  OFF • Please use this function to prevent tampering or accidental operation.
Page 47 SECURITY menu SECURITY menu This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed. To use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1.
Page 48 SECURITY menu Item Description The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ►...
Page 49 SECURITY menu Item Description PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 Turning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/ off menu.
Page 50 SECURITY menu Item Description If this function is set to ON when the vertical angle of the projector or MIRROR setting at which the projector is turned on is different than the previously recorded, the TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal.
Page 51 SECURITY menu Item Description The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT; • The MY TEXT DISPLAY menu will be unavailable, which can prohibit changing the DISPLAY setting. •...
Page 52 SECURITY menu Item Description (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► button to display the MY TEXT DISPLAY on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select on or off.
Page 53 Maintenance Maintenance Replacing the lamp A lamp has ﬁnite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
Page 54 Maintenance Replacing the lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Page 55 Maintenance Cleaning and replacing the air ﬁlter The air ﬁlter unit of this projector consists of a ﬁlter cover, two kinds of ﬁlters, and a ﬁlter frame. The new double large ﬁlters system is expected to function longer. However, please check and clean it periodically to keep ventilation needed for normal operation of the projector.
Page 56 Maintenance Cleaning and replacing the air ﬁlter (continued) Turn the projector on and reset the ﬁlter time using the FILTER TIME item in the EASY MENU. (1) Press the MENU button to display a menu. (2) Point at the FILTER TIME using the ▼/▲ button, then press the ► button. A dialog will appear.
Page 57 Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens If the lens is ﬂawed, soiled or fogged, it could cause deterioration of display quality.
Page 58 Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect the power plug from the power outlet.
Page 59 Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP Description indicator indicator indicator Lighting Turned Turned The projector is in a standby state. Orange Please refer to the section “Power on/off”.
Page 60 Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator There is a possibility that the interior portion has become heated. Please turn the power off, and allow the projector to cool down at least Blinking 20 minutes. After the projector has sufﬁciently cooled down, please make Turned Lighting conﬁrmation of the following items, and then turn the power on again.
Page 61 Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Reference Phenomenon Cases not involving a machine defect page The electrical power cord is not plugged in. Correctly connect the power cord.
Page 62 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. Correctly connect the audio cables. The MUTE function is working. Restore the sound pressing MUTE or VOLUME +/- button on the remote control.
Page 63 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function.
Page 64 Speciﬁcations Speciﬁcations Speciﬁcation Item Speciﬁcation Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens, f = 19 ~ 23 mm (approximately) Lamp 210W UHP Speaker Power supply AC 100-120V/3.7A, AC220-240V/1.8A Power consumption 330 W Temperature range 5 ~ 35°C (Operating)
Page 65 Speciﬁcations Speciﬁcations (continued) [unit: mm]...

This manual is also suitable for:

Cp-x2510 Cp-x3010 Cp-x2010