Page 2
User Name: ID number on tracker Password: 123456 If you have more SinoTrack GPS trackers, and want to manage them in one account, please contact us, we will create an account for you, so you can monitor multiple devices on the platform at the same time.
Page 3
1. Choose GSM card, it should be Micro SIM card, without PIN code. 2. Proper insert GSM card, the tracker will start, connect external power supply. 3. Put device outside around 30s, LED lights will keep lighting on stands for device can work normally.
Page 4
2. The IP and Port is correct; 3. The ID on platform is correct; 4. The device working model, (SMS model or GPRS model) How to install: Insert SIM Card in ST-909, And insert ST-909 to car cigarette lighter 4/12...
Page 5
LED Status 1.1. Blue LED--- GPS Status Status Meaning Flashing No GPS Signal or GPS starting GPS OK 1.2. Orange LED---GSM Status Status Meaning Flashing No SIM card or GSM starting GSM OK The default password is: 0000 The default mode is normal working (sleep off). GPS Status: A is get location, V is invalid location.
Page 6
4. Get location with Google link Command: 669+password Sample: 6690000 When ST-909 receives the command, it will read the GPS data, and send back the location with Google link; You can open the link to check the tracker location on maps.
Page 7
5. Get location by phone call. You can use any mobile to call the SIM Card in tracker, it will reply the location with Google link;you can open the link to check the tracker location on maps. When you call the tracker when it is in invalid location, it will reply the last valid location to you, after it get new location again, it will send the seconds SMS to you with new location.
Page 8
8. Geo Fence (send alarm to the first number only) Open Geo Fence: 211+password Sample: 2110000 Reply: SET OK Close Geo Fence: 210+password Sample: 2100000 Reply: SET OK Set the Geo Fence Sample: 0050000 1000 (the Geo Fence is 1000 meters) Reply SET OK We suggest the Geo Fence more than 1000 meters.
Page 9
11. Shock Alarm (send SMS alarm to the first number) Open Shock Alarm: 181+password+T Sample: 1810000T10 Reply: SET OK The T meaning shocking time, the unit is second, It from 0 to 120 senconds. Close Shock Alarm: 180+password Sample: 1800000 Reply: SET OK 12.
Page 10
14. Sleep mode Open Sleep mode Command: SLEEP0000 1 Reply: SET OK Close Sleep mode Command: SLEEP0000 0 Reply: SET OK 15. Set APN Command 1: 803+password+Blank+APN Sample: 8030000 CMNET Reply: SET OK If your APN need user and pass: Command : 803+password+Blank+APN+Blank+APNuser+Blank+APNpass Sample: 8030000 CMNET CMNET CMNET Reply: SET OK...
Page 11
Online Track: Please login from VIP.SinoTrack.com http://45.112.204.242 You can also down load our APPS on website to track on your mobile: 11/12...
Page 12
Other Functions: 1. RESTART The tracker will restart. 2. RCONF Read the configure of tracker Tracker will reply: AT-909,ID: 8160528336,UP:0000,U1:,U2:,U3:,MODE:GPRS DAILY:OFF,GEO FENCE: OFF,OVER SPEED:OFF VOICE:ON,SHAKE ALARM:OFF,SLEEP:OFF,APN:CMNET,,,IP: 45.112.204.242:8090,GPRSUPLOAD TIME:20 TIME ZONE:E00 AT-909: software version ID: 8160528336 (Tracker ID) UP:0000 (password, default is 0000) U1:the first control number, U2:the second control number, U3:the third control number.
Need help?
Do you have a question about the ST-909 and is the answer not in the manual?
Questions and answers