Sinotrack ST-901 User Manual

Sinotrack ST-901 User Manual

Hide thumbs Also See for ST-901:

Advertisement

GPS Tracker ST-901
User Manual
1/10

Advertisement

loading

  Also See for Sinotrack ST-901

  Related Manuals for Sinotrack ST-901

  Summary of Contents for Sinotrack ST-901

  • Page 1 GPS Tracker ST-901 User Manual 1/10...
  • Page 2 LED Status 1.1. Blue LED--- GPS Status Status Meaning Flashing No GPS Signal or GPS starting GPS OK 1.2. Orange LED---GSM Status Status Meaning Flashing No SIM card or GSM starting GSM OK The default password is: 0000 The default mode is normal working (ACC Mode). GPS Status: A is get location, V is invalid location.
  • Page 3 Installation: 1. The GPS antenna side should towards to clear sky. (Can’t put under Metal, but Glass and Plastic is ok) 2. Connect the wires: 3/10...
  • Page 4 4. Get location with Google link 669+password Command: 6690000 Sample: When ST-901 receives the command, it will read the GPS data, and send back the location with Google link; you can open the link to check the tracker location on maps. 4/10...
  • Page 5 5. Get location by phone call. You can use any mobile to call the SIM Card in tracker, it will reply the location with Google link;you can open the link to check the tracker location on maps. When you call the tracker when it is in invalid location, it will reply the last valid location to you, after it get new location again, it will send the seconds SMS to you with new location.
  • Page 6 8. Geo Fence (send alarm to the first number only) Open Geo Fence: 211+password Sample: 2110000 Reply: SET OK Close Geo Fence: 210+password Sample: 2100000 Reply: SET OK Set the Geo Fence Sample: 0050000 1000 (the Geo Fence is 1000 meters) Reply SET OK We suggest the Geo Fence more than 1000 meters.
  • Page 7 11. Shock Alarm (send SMS alarm to the first number) Open Shock Alarm: 181+password+T Sample: 1810000T10 Reply: SET OK The T meaning shocking time, the unit is second, It from 0 to 120 senconds. Close Shock Alarm: 180+password Sample: 1800000 Reply: SET OK 12.
  • Page 8 If your APN need user and pass: Command 2: 803+password+Blank+ APN+Blank+ APN user+Blank+ APN pass Sample: 8030000 CMNET CMNET CMNET Reply: SET OK 15. Set the IP and Port Command: 804+password+Blank+IP+Blank+Port Sample: 8040000 103.243.182.54 8090 Reply: SET OK 16. Set the time interval ACC on time interval (default is 20 seconds) Command: 805+password+Blank+T Sample: 8050000 20...
  • Page 9 Online Track: Please login from www.sinotrack.com http://103.243.182.54 You can also down load our APPS on website to track on your mobile: 9/10...
  • Page 10: Other Functions

    Other Functions: 1. RESTART The tracker will restart. 2. RCONF Read the configure of tracker Tracker will reply: AU08,ID: 8160528336,UP:0000,U1:,U2:,U3:,MODE:GPRS DAILY:OFF,GEO FENCE: OFF,OVER SPEED:OFF VOICE:ON,SHAKE ALARM:OFF,SLEEP:OFF,APN:CMNET,,,IP:103.243.182.54:8090,GPRSUPLOAD TIME:20 TIME ZONE:E00 : software version AU08 : 8160528336 (Tracker ID) :0000 (password, default is 0000) :the first control number, :the second control number, :the third control number.