Sinotrack ST-908 User Manual

Sinotrack ST-908 User Manual

Gps vehicle tracker

Advertisement

ST-908
User Manual
GPS Vehicle Tracker
2016-09-01
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ST-908 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sinotrack ST-908

  • Page 1 ST-908 User Manual GPS Vehicle Tracker 2016-09-01...
  • Page 2 If you haven’t told us your APN, you need to send SMS to change it: Send SMS: A000000,011,APN,APN User,APN Pass A000000,011,APN (If it without user and pass of APN). The Tracker will connect to our software. You can login your account on our software to manage your trackers www.sinotrack.com or http:103.243.182.54...
  • Page 3: Table Of Contents

    Table of Contents 1. Working Directions........................…..4 2. GPS Tracker Installation.......................4 2.1. Product Parts List ........................4 2.2. Precaution before Installation ....................5 2.3. Installation..........................6 2.4. Wiring Description........................7 3. Operating Instructions ........................8 4. SMS Tracking by Mobile......................11 4.1. Position Report Function.....................11 4.2. Tracking Function........................12 4.3.
  • Page 4: Working Directions

    1. Working Directions Thank you for your purchase of ST-908 Vehicle GPS Tracker. In order to realize the full functions of this product, please read this manual carefully before starting to use the product. This product can only be maintained and repaired by qualified professional service personnel.
  • Page 5 2. Wiring Installation 2.1. Product Parts List GPS Tracker Unit GPS Antenna GSM Antenna Car Charger Lighter Socket...
  • Page 6: Precaution Before Installation

    2.2. Precaution before Installation Check if all the parts are included. Prepare a SIM card for GSM communication. Use some other mobile phone to confirm that the PIN code has not been set and that it can dial out and receive telephone calls and SMS without problem.
  • Page 7: Wiring Description

    If your car is with metallic windshield please cut a hole on the windshield above the place where you put the GPS antenna, so that the antenna can receive the GPS signals. 2.3.4 Step 4: Connect power charging ST-908 connects to the 4pin and 6pin wires. 2.4. Wiring Description 4 pins connector...
  • Page 8: Operating Instructions

    6 pins connector Color function DC in Input voltage: 8-40V Suggestion: 12V Black Brown Output , starter kill relay you can use it to cut the electricity or oil of the car White SOS button Green Output , starter kill relay you can use it to cut the electricity or oil of the car Blue ACC signal detecting According to the relay parameter to make sure to following requirement:...
  • Page 9 number. (Tel Number must <20 digits ) Set the time interval of A******,003,XXX 003: command code position refresh to SOS ******: password, default 000000 number XXX: (3 digital) XXX =000,stop XXX = 001 – 999 time internal (unit: min) Set low power alarm A******,004,X 004: command code When the AL-900C/E...
  • Page 10 Control the output A******,007,P,F 007: command code ******: password, default 000000 the position of the output P =1 output 1 P =2 output 2 the control signal F =1 give the relay the current to drive it (cut off the car power). F =0 cut off the current of the relay (comeback the normal).
  • Page 11: Sms Tracking By Mobile

    Send a SMS message or make a telephone call to the AL-900C/E. Step1 vehicle will report its location back to you by SMS, which including the position Step2 information Edit a message as following format, and then send it to ST-908: Command Remark Send Format: A+Password+,+000...
  • Page 12: Tracking Function

    Position Data every 3 minute. Step2. AL-900C/E will send back one SMS-----Set Time OK. This SMS means that ST-908 is in tracking mode now and preset time interval is 3 minutes. Step3. AL-900C/E will send back position SMS at preset time interval.
  • Page 13: Gprs Tracking By Computer

    4.3. Stop tracking function. This function is used to turn off tracking report function. Edit a message as following format, and then send it to AL-900C/E: Command Remark Command format: A+passwaord+,+003+,+000 003: command code 000000: password, default For example: A000000,003,000 000: 0 minute interval, mean stop back...
  • Page 14: Take Photo Function

    6. Take Photo function (only for ST-908): Connect the Camera to ST-908, You can send a command to take photographs; the car terminal will shoot pictures and spread to Center. After that, pictures will display on the operation platform. 6.1. Take photos on software.
  • Page 15: Lcd Screen888

    7. LCD Screen (only for ST-908): 7.1. Use as navigation. 7.2. Make and receive phone calls. 7.3. Receive massages from control center. 7.4. Receive GPS signal. 8. Fuel Sensor (only for ST-908) 9. Temperature Sensor (only for ST-908) Open http://www.online-track.com http://121.201.110.62/...
  • Page 16 Contact us: You can send email to us, Or add our Skype to talk with us online: Email: info@sinotrack.com sales@sinotrack.com ■ Skype: ventureshi autoleaders.sun ■ About distributors: We have distributors in Asian, Middle East, North American, South American, Africa, and European, over 60 countries.

Table of Contents

Save PDF