Advertisement
3
CONTROLS ON THE RIGHT SIDE OF THE HANDLEBAR
IMPORTANT
The electric components work only when the igni-
tion switch is in position "
".
•
1) LIGHT SWITCH (
-
) (non provided
CAUTION
Before operating the light switch, make sure that the dimmer
switch (
-
) is in position "
When the light switch is in position "
it is in position "
", the parking lights and the dashboard light
are on; when the switch is in position "
dashboard light and the low beams are on.
18
use and maintenance Atlantic 500
2
1
1a
)
".
•
", the lights are off; when
" the parking lights, the
By means of the dimmer switch, (
ate the high beam.
1a) DIMMER SWITCH (
-
When it is in position "
" the parking lights, the dashboard light
and the low beams are always on; when it is in position "
high beam comes on.
2) ENGINE STOP SWITCH (
WARNING
Do not operate the engine stop switch "
conditions.
It is a safety or emergency switch. When it is in position "
engine can be started. If it is in position "
CAUTION
With stopped engine and ignition switch in position "
battery may run down. With stopped vehicle, stop the engine
and then turn the ignition switch to position "
3) START PUSH-BUTTON (
By pressing the start push-button "
engine run. For the starting, see page 34 (STARTING).
DEACTIVATION
By inserting the key into the ignition switch and turning it to position
"
", the device is automatically disconnected.
-
), it is possible to oper-
)
-
)
-
" in running
",the engine stops.
" the
".
)
", the starter makes the
", the
",the
Advertisement
