Table of Contents
Advertisement
ZyWALL 2 Series User's Guide
If you uploaded the default configuration file you may need to change the IP address of your computer to be
in the same subnet as that of the default device IP address (192.168.1.1). See your Quick Start Guide for
details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Configuration screen.
Figure 20-12 Configuration Upload Error
20.5.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and returns the
ZyWALL to its factory defaults as shown on the screen. The following warning screen will appear.
Figure 20-13 Reset Warning Message
20-10
Maintenance
Advertisement
Table of Contents
