ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 User Manual page 675

Table 247 Built-in Services Logs (continued)
LOG MESSAGE
Console baud has been
changed to %s.
Console baud has been
reset to %d.
DHCP Server on
Interface %s will not
work due to Device HA
status is Stand-By
DHCP Server on
Interface %s will be
reapplied due to
Device HA status is
Active
DHCP's DNS option:%s
has changed.
Set timezone to %s.
Set timezone to
default.
Enable daylight
saving.
Disable daylight
saving.
DNS access control
rules have been
reached the maximum
number.
DNS access control
rule %u of DNS has
been appended.
DNS access control
rule %u has been
inserted.
DNS access control
rule %u has been
appended
DNS access control
rule %u has been
modified
DNS access control
rule %u has been
deleted.
DNS access control
rule %u has been moved
to %d.
ZyWALL 1050 User's Guide
DESCRIPTION
An administrator changed the console port baud rate.
%s is baud rate assigned by user
An administrator changed the console port baud rate back to the
default (115200).
%d is default baud rate
If interface is stand-by mode for device HA, DHCP server can't be run.
Otherwise it has conflict with the interface in master mode.
%s is interface name
When an interface has become the HA master, the DHCP server
needs to start operating.
%s is interface name
DHCP pool's DNS option support from WAN interface. If this interface
is unlink/disconnect or link/connect, this log will be shown.
%s is interface name. The DNS option of DHCP pool has retrieved
from it
An administrator changed the time zone.
%s is time zone value
An administrator changed the time zone back to the default (0).
An administrator turned on daylight saving.
An administrator turned off daylight saving.
An administrator tried to add more than the maximum number of DNS
access control rules (64).
An administrator added a new rule.
%u is rule number
An administrator inserted a new rule.
%u is rule number
An administrator appended a new rule.
%u is rule number
An administrator modified the rule %u.
%u is rule number
An administrator removed the rule %u.
%u is rule number
An administrator moved the rule %u to index %d.
%u is previous index
%d variable is current index
Appendix B Log Descriptions
675