Table of Contents
Advertisement
Chapter 21 SSL VPN
Table 102 VPN > SSL VPN > Access Privilege > Add/Edit (continued)
LABEL
User/Group
Add
SSL Application
List
Add
Network
Extension
Enable Network
Extension
Assign IP Pool
DNS/WINS
Server 1..2
Network List
Add
Ok
Cancel
21.4 SSL Connection Monitor
The ZyWALL keeps track of the users who are currently logged into the VPN SSL client
portal. Click VPN > SSL VPN in the navigation panel and click the Connection Monitor tab
to display the user list.
Use this screen to do the following:
322
DESCRIPTION
The Available list displays the name(s) of the user account and/or user group(s) to
which you have not applied an SSL access policy yet.
To associate a user or user group to this SSL access policy, select a user account
or user group and click >> to add to the Member list. You can select more than
one name.
To remove a user or user group, select the name(s) in the Member list and click
<<.
Click Add to display a screen you use to create a new user account or user group
name (see
Section 34.2.1 on page 502
The Available list displays the name(s) of the SSL application(s) you can select
for this SSL access policy.
To associate an SSL application to this SSL access policy, select a name and click
>> to add to the Member list. You can select more than one application.
To remove an SSL application, select the name(s) in the Member list and click <<.
Click Add to create a new SSL application object. Refer to
562
for more information.
Select this option to create a VPN tunnel between the authenticated users and the
internal network. This allows the users to access the resources on the network as
if they were on the same local network.
Clear this option to disable this feature. Users can only access the applications as
defined by the selected SSL application settings and the remote user computers
are not made to be a part of the local network.
Select the name of the IP address pool from which an IP address is assigned to
the user computer to establish a VPN connection.
Note: Make sure other devices on the local network do not use
these IP addresses.
Select the name of the DNS or WINS server whose information the ZyWALL sends
to the remote users. This allows them to access devices on the local network using
domain names instead of IP addresses.
To allow user access to local network(s), select a network name in the Available
list and click >> to add to the Member list. You can select more than one network.
To block access to a network, select the network name in the Member list and
click <<.
Click Add to create a new network object. Refer to
more information.
Click Ok to save the changes and return to the main Access Privilege screen.
Click Cancel to discard all changes and return to the main Access Privilege
screen.
for details).
Section 42.3 on page
Chapter 35 on page 511
ZyWALL 1050 User's Guide
for
Advertisement
Table of Contents
Troubleshooting
