ZyXEL Communications ZYAIR G-5100 Quick Start Manual page 8

Your settings are not saved when you click Back.
1 This screen is optional. You can just click Next.
System Name is for identifying the
ZyAIR. You can enter your computer's
"Computer Name".
Domain Name: Enter a domain name if
your ISP requires one for
authentication; otherwise you can leave
it blank or set to whatever may have
displayed automatically.
2 Use the second wizard screen to set up the wireless LAN.
Note: The wireless stations and ZyAIR must use the same ESSID, channel ID and WEP encryption key
(if WEP is enabled) for wireless communication.
The ZyAIR has two WLAN adapters.
Select one to configure.
Enter a descriptive name to identify the
ZyAIR in the wireless LAN.
Click Scan to have the ZyAIR
automatically select a channel and
display it in the Channel ID field.
Select 64-bit or 128-bit to encrypt data
frames before transmitting them over
the wireless network.
Select Disable to turn off WEP data
encryption.
Select ASCII or HEX WEP key input
method and then follow the on-screen
instructions to set up the WEP keys.
Click Next to continue.
ZyAIR G-5100
8