META Quest 3 Setup Manual page 3

META QUEST 3
Getting Ready
Prepare Your Play Area
Clear Space: Aim for at least 2 meters by 2 meters of free space to move comfortably.
»
» Good Lighting: Choose a well-lit room. Avoid rooms with dark walls, mirrors, glass, or other reflective
or moving surfaces that could interfere with tracking.
Remove Protective Film: Remove any protective film covering the lenses or cameras of the headset.
»
Ensure Safety: Keep controllers and accessories out of reach of children.
»
Install Batteries in the Controllers
Remove Insulating Paper: Remove the paper tab from each controller's battery compartment to
»
activate them.
Insert Batteries: Ensure that the batteries (pre-installed AA batteries) are placed correctly in the
»
controllers.
Powering On
Power On the Controllers
First Use: The controllers will power on
»
automatically once the insulating paper is
removed.
Subsequent Use: Press and hold the Meta
»
button (on the right controller) or the Menu
button (on the left controller) for 2 seconds
until the status light blinks white, indicating
the controller is ready to use.
Power On the VR Headset
Press and hold the Power button (on the left
»
side of the headset) for 3 seconds until you
hear a chime sound and see the Meta logo on
the display.
Skills Support | Meta Quest 3
VR
Setup Guide
3