Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Orion XEQ-X3B
Summary of Contents for Orion XEQ-X3B
- Page 1 Xeq-x3B PARAMETRIC EQUALIZER...
- Page 2 Included in this manual are crucial guidelines on the proper installation and setup of your new Orion product, as well as instructions on how to seamlessly integrate it into your vehicle’s audio system.
- Page 3 TABLE OF CONTENTS FEATURES..................................3-6 INSTALLATION................................7-8 TROUBLESHOOTING..............................9 WARRANTY..................................10...
-
Page 4: Features
FEATURES Equalizers, essential tools for fine-tuning audio systems, come in various forms, each suited to specific audio engineering needs. The three main types are graphic equalizers, which allow users to adjust a fixed set of frequency bands; parametric equalizers, which enable precise control over frequency, bandwidth, and amplitude;... - Page 5 FEATURES The subwoofer output feature provides an excellent opportunity to enhance your audio system with subwoofers, significantly improving the depth and richness of the bass. This functionality is compatible with any unit that operates within a 12-volt negative ground electrical system. Key Features Include: •...
- Page 6 FEATURES POWER: After connecting the Ground, Remote and Power wires, plug in the Power Lock connector here. 2. LINE INPUT: Chrome plated RCA inputs. Plug in the RCA cables from the main Source unit here. 3. AUX INPUT: Chrome plated RCA inputs. Plug in the RCA cables from the AUX Source unit here.
- Page 7 FEATURES FADER CONTROL: Controls the output level to front and rear. 2. VOLUME CONTROL: This control adjusts the output level. 3. INPUT SWITCH: Press to select auxiliary or line. 4. SUB LEVEL: Independent level control for subwoofer output. 5. PARAMETRIC EQUALIZER CONTROLS: Control the frequency response of the boost or cut, with the 11 band controls: 30Hz, 60Hz, 120Hz, 240Hz, 500Hz, 1KHz, 3KHz, 6KHz, 8KHz, 10KHz, 16KHz.
-
Page 8: Installation
INSTALLATION NOTES: Set your source volume at one-half to three quarter up and leave it. Always use your volume as a master(main) volume control. It has better electronics, higher S/N ratio and is more linear than any source unit volume available. If engine noise is audible, try raising the volume on the source unit, and/or check the ground connection on the unit. - Page 9 INSTALLATION Select the location to mount the unit under the dashboard. Drill (4) 4.2 mm diameter holes. Fix the mounting bracket to the location with (4) 4 x 15 mm tapping screw. Be careful when drilling so as not to damage existing wiring under the dashboard.
-
Page 10: Troubleshooting
If the problem still occurs, see your authorized Orion dealer. • Speakers may be damaged. Consult your authorized Orion dealer. No Sound coming from the unit • The wrong input is selected. Change the AUX mode switch to turn the main inputs on. -
Page 11: Warranty
4. This warranty does not cover car static, electrical interference, adjustments or labor costs for the removal or reinstallation of the unit for repair. 5. The sole responsibility of Orion under this warranty shall be limited to the repair or replacement thereof, at the sole discretion of Orion. - Page 12 3130 WEST 15TH AVENUE HIALEAH, FLORIDA 33012 TEL: 786.464.0247 EMAIL: SUPPORT@ORIONCARAUDIO.COM ORIONCARAUDIO.COM PROUD SPONSOR OF Copyright ORION All rights reserved. Any unauthorized reproduction or use of any Orion logos, images or design elements is strictly prohibited by law. Specifications subject to change without notice. REV. 24.5...
Need help?
Do you have a question about the XEQ-X3B and is the answer not in the manual?
Questions and answers