Advertisement
Quick Links
Instructions to use Marley 'Get Together 2' Bluetooth® speaker
SWITCHING ON and CONNECTING
SWITCHING OFF
1. If not ON, switch on power by pressing power
button for 2 seconds.
button will temporarily illuminate)
NOTE: The power button is found on the back of the
speaker).
2. It automatically will enter Bluetooth pairing mode
with the
Blue LED
flashing for the next few minutes.
3. On your Smart phone / Tablet connect to the
Bluetooth device named "Get Together 2"
Note: You will need to do this each time you use the system.
Your welcome, to switch the power off if you would
like to conserve power. However, you don't need to do
anything and can just leave the unit as is, ready for the
next person.
1. Switch OFF power by pressing power button for 2
seconds. (The power button is found on the back
of the speaker).
NOTE: That if not paired the speaker will power down
after about 5 minutes.
Page 1 of 2
(Green LED
below on/off
on the top of the speaker unit
Advertisement
Related Manuals for Marley Get Together 2
Summary of Contents for Marley Get Together 2
- Page 1 Instructions to use Marley ‘Get Together 2’ Bluetooth® speaker SWITCHING ON and CONNECTING 1. If not ON, switch on power by pressing power button for 2 seconds. (Green LED below on/off button will temporarily illuminate) NOTE: The power button is found on the back of the speaker).
- Page 2 Troubleshooting Tips Problem Possible solution Make sure the speaker is connected/plugged into the power outlet No Power Ensure that the power outlet is switched ON Not able to connect/find Make sure that you have your device on Smart Bluetooth switched on your Smart phone/device phone/device Example screen shots from iPhone settings...
Need help?
Do you have a question about the Get Together 2 and is the answer not in the manual?
Questions and answers
Unit wont stay on. When button pressed turn on message and turn off Message right away. Thank you