English - ZyXEL Communications VANTAGE REPORT - V3 Quick Start Manual

Vantage Report
Vantage Report collects log entries and traffic statistics from ZyXEL devices and then generates
graphical and tabular reports about network performance and events.
A
Install Vantage Report on the Vantage Report server (B). Then, use the web configurator (A) to
configure it. (The web configurator can run on a remote computer or on the Vantage Report
server.) Finally, configure the ZyXEL devices (C) to send their log entries and traffic statistics to
the Vantage Report Server. The Vantage Report server collects this information and builds
statistical reports about the network. You and others can look at these reports any time in the
web configurator or in regular e-mail messages.
Overview
1 Preparation - Make sure the Vantage Report server meets the minimum requirements, and
get the Vantage Report server ready for installation.
2 Installation - Install Vantage Report on the Vantage Report server.
3 Login - Use the web configurator to access the Vantage Report server.
4 E-mail Setup - Set up the administrator e-mail address and SMTP mail server settings in
Vantage Report, and test the SMTP settings.
5 Registration - When you install Vantage Report, you get the basic version. You do not have to
register Vantage Report unless you want to get the trial version or upgrade to the full version.
(See section 5 for more information about versions.)
6 Device Setup - Set up the ZyXEL devices, and add them in the Vantage Report server.
1 Preparation
Check these things before you install Vantage Report.

ENGLISH

B
3
C