Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Beko KDVC100K
Summary of Contents for Beko KDVC100K
- Page 1 110 cm OVEN SERVICE MANUAL 1 | EN...
- Page 2 CHAPTER / UNMOUNTİNG STEPS ..................3 ......................3 EPLACEMENT OF THE PLASHBACK ..................4 EPLACEMENT OF THE URNER HANGE ......................4 EPLACEMENT OF THE URNER LATE ........................7 EPLACEMENT OF THE KNOB ......................... 8 EPLACEMENT OF THE İNJECTOR ..........................8 DJUSTMENT ....................
- Page 3 Chapter / Unmounting Steps Replacement of the Splashback Splashback is mounted with 3 screws 3 | EN...
- Page 4 Replacement of the Burner Cup / Head Change Take accessories on the burner plate. Replacement of the Burner Plate Firstly remove splashback. Take accessories on the burner plate. Remove the screws of burner plate fixing sheet that are placed on burner plate via screwdriver.
- Page 5 Burner group screws are removed 5 | EN...
- Page 6 Lift up the burner plate and push forward the plate and take the burner plate. 6 | EN...
- Page 7 Replacement of the knob Hold and pull the knob. Insert the knob which you want to change. 7 | EN...
- Page 8 Replacement of the injector Firstly remove burner caps and heads. Importent: Make sure all gas taps are close before injector change. Gas Top Adjustment Firstly remove related knobs. Bring related gas top to idiling location. Open gas top to max and ignite the burner. Idiling injector is decrease gas flow when it is turned right.
- Page 9 Replacement of the burner room seals Firstly remove the burner plate. Burner room seal can be removed by pulling. Replace with new one. Replacement of the panel Pull the panel according to figure. Open oven door. Remove all knobs. Unscrew 2 screws which fix the commutator to panel. 9 | EN...
- Page 10 Unscrew 2 screws top which are located left/right side of the panel. 10 | EN...
- Page 11 Unscrew 2 screws which are located down left/right side of the panel. Replacement of the gas tops Firstly remove control panel and burner plate. 11 | EN...
- Page 12 Pull and remove the switches on gas taps. Taps are taken by removing the two screws with wrench. The gas tap replace with new one. 12 | EN...
- Page 13 Replacement of the burner rooms Firstly remove the burner plate. Unplug the thermocouple Remove the feeding tube by unscrewing the nut on the tube. Replace the burner’s room with the new one. 13 | EN...
- Page 14 Changing the vitroceramic flammable Remove the heater cable connections help of pliers. 14 | EN...
- Page 15 Remove the heater housing connecting components with Lara took a screwdriver. Replace the heater with a new one after divorce. The leaf spring located under the Hot Plate Make sure enough up lift your hotplate. Hot plate must be in contact with the glass completely. Replacement of the Spark Plug Firstly remove the burner plate.
- Page 16 Pull and remove the switches on gas tops. Unplug the has tops by removing the two screws with wrench. Replace the gas top with new one. Replacement of the top oven door Open oven door. 16 | EN...
- Page 17 Open clips which are located left/right side of the door by pushing them. Open door half pasition then pull it up. 17 | TR...
- Page 18 At the top right and left side the top oven front door there is a door support sheet.Unscrew the screws left and right side. Pull the door support sheet. Remove the front door inner glass. 18 | TR...
- Page 19 Replacement of the main oven door Two screws in lock on cavity across bottom door can be unscrewed by using screwdriver. After that lock pin can be replaced with the new one. Lock part in bottom door shown in photograph can be take out by unscrewing two screws. 19 | TR...
- Page 20 To replace lock parts should be opened by using screwdriver. Replacement of the main oven door Open the main oven door. Unscrew the screw at the left and loosen the other two screws (attention do not unscrew the other screws and do not release the hinge) that connect the top hinge to the oven body.
- Page 21 Lift the top hinge slightly upwards and replace the main oven door. Reassemble by reversing the above procedure. 21 | TR...
- Page 22 Replacement of the handle Firstly remove the front door. Then; Unscrew the two screws by screw driver. Replace the handle a new one. 22 | TR...
- Page 23 Replacement of the Door hinge Firstly remove burner plate control panel side walls and backwall. Then remove the door. Finally unscrew 2 screws which fix the hinge. Replacement of the Door seal Remove door seals from the hales which are on the cavity. 23 | TR...
- Page 24 Replacement of the ring heater and Fan Protector Sheet Remove ring heater connections. Unscrew grill protector sheet 24 | TR...
- Page 25 Unscrew 2 screw that connects ring heater to cavity. 25 | TR...
- Page 26 Take the ring heater from the cavity plug in the new heater according to electrical instructions. Replacement of the Fan Blade Unscrew the nut on the fon with nippers. 26 | TR...
- Page 27 Replacement of the fan motor Firstly remove the back wall and fon protector; Unplug fan motor’s connections. 27 | TR...
- Page 28 Unscrew the nut on the fon with nippers. 28 | TR...
- Page 29 Unscrew three screws that connect fan motor to cavity. Plug the new motor according to electrical instructions Replacement of the grill heater Firstly remove top and back wall of the oven; Unplug the heater connectios. Unscrew the two scews that connect heater to cavity. 29 | TR...
- Page 30 Open the oven door and unscrew the screws that connect heater to top wall. Remove the grill heater that swings freely. Replace the heater with the new one according to electrical instructions. 30 | TR...
- Page 31 Replacement of the Thermostat Bulb Thermostat bulb is placed on the right top of the rear wall of the cavity.To reach thermostat bulb,upper and rear cover sheets should be demounted unscrew the screw of bulb support sheet. 31 | TR...
- Page 32 Replacement of the oven bottom burner Firstly remove the clips spark plug and thermocouple. Oven bottom burner spark plug lift the clips you can see the picture. 32 | TR...
- Page 33 Pull the saprk plug to the oven bottom burner. Unscrew the 3 screws to the oven bottom burner. 33 | TR...
- Page 34 Unmounth the feeding tube with mwtric 16 key. Pull the burner brulor to the burner protecting sheet. 34 | TR...
- Page 35 Oven bottom burner injector unmount barrel spanner. Replacement of the signal lamp Firstly remove the burner plate. Depends on the signal lamp socket, plug socket, remove the signal lamp behind the dashboard. Sticking Pull the plug and replace the signal lamp 35 | TR...
- Page 36 Replacement of the oven lamp Rotate the illumination glass counterclockwise to replace just the lamp. Replace the lamp with the new one. Replacement of the Glass Wool For this operation must remove the first side walls and the rear housing 36 | TR...
- Page 37 Disconnect the frame wire around the wire wrapped with glass wool. Glass wool loose change with a new one. Replacement of the Sides Rock Remove side rocks from the cavity by saving balts. 37 | TR...
- Page 38 Replacement of the side rock screw Rotate the side rack screw mounted on the side Wall counterclockwise and replace with the new one. 38 | TR...
- Page 39 Replacement of the oven lamp square Before this procedure the oven wire racks, glass wool and lamp electrical connections must be removed Nails the lamp by pressing square outside the chassis frame in the frame edges to hold the broken glass is pushed towards the drinker Remove the space where the glass into the frame by pulling Insert the cables before inserting the glass again, and then make sure that the glass is seated on the slot snaps nails.
- Page 40 Replacement of the Back Wall Unscrew the back wall. 40 | TR...
- Page 41 Replacement of the Terminal Box Firstly remove the back wall. Connector can be removed by nippers. 41 | TR...
- Page 42 Replacement of the Side Wall Before replacing the top cover side wall of the oven, cook top, rear enclosure and control panel disassembly is required. On the back, the side wall of the product with the help of tip screwdriver remove the screws On the front of the product, the side wall with the help of the front strut connecting the tip...
- Page 43 Lifting up the upper part of the side wall in the back reinforcement panel separated from the side wall Before you leave the range of 30 degrees from the rear of the side wall of the oven 43 | TR...
- Page 44 ling upwards at the rear of the side wall of the furnace and disconnect the front of the upright nails. 44 | TR...
- Page 45 Replacement of the oven side wall decors sheet Side wall of the oven must be dismantled before beginning this operation. The side of the side wall decor plate with the help of tip screwdriver remove the screws. 45 | TR...
- Page 46 The tabs on the side wall on the side of the side wall decor wall plate.Disconnect remove the upward direction 46 | TR...
- Page 47 47 | TR...
- Page 48 Envelope IV 48 | TR...
Need help?
Do you have a question about the KDVC100K and is the answer not in the manual?
Questions and answers