ZyXEL Communications PLA-450 Quick Start Manual page 17

return to their factory default. Use the directions in this
guide to configure your settings again.
I cannot access the HomePlug AV powerline
network.
1 Make sure that the network password is the same on all of
your HomePlug AV adapters and that the DAKs for your
HomePlug AV devices are typed correctly.
2 Make sure your powerline adapters are HomePlug AV
compliant. The PLA-450 does NOT recognize earlier
versions of HomePlug adapters such as HomePlug 1.0 or
1.0.1.
3 Make sure your powerline adapters are all on the same
electrical wiring. Connect another power line adapter into
an outlet close to your PLA-450's power outlet. They are
probably now on the same electrical wiring. Check the
HomePlug
adapter was probably previously on separate electrical
wiring. Ask an electrician for more information on the
electrical wiring in your building.
I cannot see new HomePlug AV devices.
1 Go to the PLA-450 web configurator HomePlug screen
(see section 5).
ENGLISH
light. If it now lights up your power line
17