Setting Up A New Network With A New Adapter - ZyXEL Communications PLA-401 V3 User Manual

Click Save and click OK on the pop-up.
4
Figure 40 Network Name Pop-up
Your new adapter will now have the same Network Name as your existing
5
network and so has now joined your existing network.
Connect the adapter to the device you want to add to the network, for example,
6
your Internet refrigerator in the kitchen.
Plug the adapter's power cord into a power outlet and, if required, switch the
7
power outlet on.
Repeat this procedure for all additional powerline adapters that you want to add to
8
your existing or new powerline network.

7.0.5 Setting Up a New Network with a New Adapter

This section shows you how to use your new powerline adapters to set up a new
powerline network separate to your existing network.
The figure below shows two powerline networks in a house. The first network (1)
shows the home computer connected to a printer and access to the Internet. The
second network (2) has no Internet access but with a media adapter such as the
PLA-401 v3 User's Guide
Chapter 7 Powerline Network Setup Tutorial
65