Setting Up Multiple Networks - ZyXEL Communications PLA-401 V3 User Manual

Then repeat steps
8
have connected using ENCRYPT and the powerline device you want to connect
(C). You must use the ENCRYPT button on both devices.
Figure 10 Adding More Powerline Adapters to Your Network
A
If you disconnected your computer or modem (or any other networking product
9
connected to your powerline device) in step
reconnect them.
This sets up your powerline network between your powerline devices.

4.3 Setting Up Multiple Networks

You can use the ENCRYPT button to set up multiple powerline networks using
your existing powerline network.
PLA-401 v3 User's Guide
4 and 5 in this section using any powerline device (A or B) you
A OR B
C
Chapter 4 The ENCRYPT Button
1 of this section, you can now
B
31