Logs And Reports; File Manager; Diagnostics; Shutdown - ZyXEL Communications NWA3000-N Series User Manual

3.5.2 Logs and Reports

The NWA3000-N series AP provides a system log, offers two e-mail profiles to
which to send log messages, and sends information to four syslog servers. It can
also e-mail you statistical reports on a daily basis.
MENU ITEM(S)

3.5.3 File Manager

Use these screens to upload, download, delete, or run scripts of CLI commands.
You can manage:
• Configuration files. Use configuration files to back up and restore the complete
configuration of the NWA3000-N series AP. You can store multiple configuration
files in the NWA3000-N series AP and switch between them without restarting.
• Shell scripts. Use shell scripts to run a series of CLI commands. These are useful
for large, repetitive configuration changes and for troubleshooting.
You can edit configuration files and shell scripts in any text editor.
MENU ITEM(S)

3.5.4 Diagnostics

The NWA3000-N series AP can generate a file containing the NWA3000-N series
AP's configuration and diagnostic information. It can also capture packets going
through the NWA3000-N series AP's interfaces so you can analyze them to identify
network problems
MENU ITEM(S)

3.5.5 Shutdown

Use this to shutdown the device in preparation for disconnecting the power.
Always use Maintenance > Shutdown > Shutdown or the shutdown
command before you turn off the NWA3000-N series AP or remove the
power. Not doing so can cause the firmware to become corrupt.
MENU ITEM(S)
NWA3000-N Series User's Guide
Configuration > Log & Report
Maintenance > File Manager
Maintenance > Diagnostics
Maintenance > Shutdown
Chapter 3 Configuration Basics
53