ZyXEL Communications NWA-1100 Quick Start Manual page 16

1. Screw the two screws provided with your NWA1100 into the wall 60mm
apart (see the figure in step 3). Use screws with 6mm ~ 8mm (0.24" ~
0.31") wide heads. Do not screw the screws all the way in to the wall;
leave a small gap between the head of the screw and the wall.
The gap must be big enough for the screw heads to slide into the screw
slots and the connection cables to run down the back of the NWA1100.
Make sure the screws are securely fixed to the wall and strong enough
to hold the weight of the NWA1100 with the connection cables.
16
ENGLISH