ZyXEL Communications NWA-1100 Quick Start Manual page 14

If you change the NWA1100's IP address, you must use the new IP
address when you next access the web configurator. If you select Get
automatically from DHCP, check your DHCP server to determine the IP
address it assigns to the NWA1100. Refer to your DHCP server's
documentation for more information.
2. If you changed your computer's IP address, return it to its previous
setting.
3. Change the wireless settings in the wireless stations to match those of
the NWA1100, if necessary. Refer to your wireless adapter's
documentation.
The NWA1100 is now ready to connect to your switch or router. You can do
this now, or once you have attached the antennas and mounted the
NWA1100.
If the NWA1100 cannot communicate with the network, ensure
that the NWA1100 is using an IP address on the same subnet as
the switch / router.
14
ENGLISH