Hardware Connections - ZyXEL Communications NBG-420N - QUICK GUIDE V3.60 Quick Start Manual

1 Hardware Connections

Do the following to make hardware connections for initial setup.
1
Antennas:
Connect each antenna to an antenna socket, ensuring the antennas are screwed
in firmly and angled upwards.
2
WAN
Connect the WAN port on your NBG420N to the Ethernet port on the device with
which you are accessing the Internet (for example, a router or modem) using an
Ethernet cable.
3
LAN
Connect the Ethernet port on your computer to a LAN port on the NBG420N using
the included Ethernet cable.
4
POWER Connection
Use the power adapter from the package to connect the POWER socket to an
appropriate power source.
1
4
ENGLISH
3
3
2
Internet