Advertisement
Quick Links
Wireless Self-emptying Rain Gauge
Contents
1. Introduction................................................................ 2
2. Get Started.................................................................2
2.1 Parts List.......................................................... 2
3. Overview.....................................................................3
3.1 Features........................................................... 4
4. Setup Guide............................................................... 5
4.1 Install batteries................................................ 5
5. Mounting..................................................................... 6
6. Wi-Fi Configure with gateway...............................10
6.1 Pair with Gateway.........................................11
6.2 Wi-Fi Connection for the Gateway.............11
7. View Online Data on WS View............................. 12
8.Maintenance............................................................. 13
9. Specification............................................................ 14
10.Warranty Information.............................................15
Sensor
Model: WH40
1
Advertisement
Related Manuals for ECOWITT WH40
Summary of Contents for ECOWITT WH40
- Page 1 Wireless Self-emptying Rain Gauge Sensor Model: WH40 Contents 1. Introduction..............2 2. Get Started..............2 2.1 Parts List............2 3. Overview..............3 3.1 Features............4 4. Setup Guide............... 5 4.1 Install batteries..........5 5. Mounting..............6 6. Wi-Fi Configure with gateway.......10 6.1 Pair with Gateway.........11 6.2 Wi-Fi Connection for the Gateway.....11...
- Page 2 1. Introduction Thanks for purchasing this WH40 wireless rain gauge sensor. This device measures rainfall rate, rainfall amount daily, weekly, monthly and yearly. The data can be streamed by GW1000 Wi-Fi Gateway(sold separately) and can be viewed on our WS View mobile application after the Wi-Fi configuration done.
- Page 3 3. Overview 1.Rain collector 2.LED Indicator 3.Bubble level 4.Battery door 5.Screw hole 6.U-bolt install hole...
- Page 4 3.1 Features Measures rainfall rate, daily, weekly, monthly and yearly data. No display, need to work with GW1000 WIFI gateway to complete the WIFI configuration on our WS View App. After the WIFI configuration, the live rainfall data can be viewed directly on the WS View App.
- Page 5 4. Setup Guide 4.1 Install batteries Insert 1XAA batteries in the battery compartment. The LED indicator will turn on for four seconds and normally flash once every 49 seconds (the sensor transmission update period). Note: If no LED light up or is lighted permanently, make sure the battery is inserted the correct way or a proper reset is happened.
- Page 6 5. Mounting Before you mount Before proceeding with the outdoor mounting detailed in this section, you may want to skip to WIFI configuration instructions in section 6 and onwards first, while you keep the assembled outdoor sensor package nearby (although preferably not closer than 5 ft.
- Page 8 Note: Use the bubble level beside the rain sensor as a guide to verify that the sensor is leveled. Mount with screws The mounting assembly also includes two screws for installation on a flat place.
- Page 9 Note: Use the bubble level beside the rain sensor as a guide to verify that the sensor is leveled. Best Practices for Wireless Communication Wireless communication susceptible interference, distance, walls and metal barriers. We recommend the following best practices for trouble free wireless communication.
- Page 10 4. Metal Barriers. Radio frequency will not pass through metal barriers such as aluminum siding. If you have metal siding, align the remote and console through a window to get a clear line of sight. 6. Wi-Fi Configure with gateway This rain sensor doesn’t has a display function and you need to use our WS View App to view the rainfall data on your mobile application after pairing...
- Page 11 6.1 Pair with Gateway If GW1000 has been in operation, and you have never had any rain sensor setup before, just power up rain sensor and GW1000 will pick rain data automatically. If a rain sensor has been hooked on GW1000 before, and you have a new rain sensor to replace the old one, unplug GW1000 from USB socket and power up again, then the new sensor will be learned...
- Page 12 7. View Online Data on WS View When the Wi-Fi configuration is done, you can view the live data of your rain sensor on the WS View application.
- Page 13 8. Maintenance 1. Clean the rain gauge once every 3 months. Rotate the funnel counter-clockwise and lift to expose the rain gauge mechanism, and clean with a damp cloth. Remove any dirt, debris and insects. If bug infestation is an issue, spray the array lightly with insecticide.
- Page 14 Replace batteries every 1-2 years. If left in too long, the batteries may leak due to environmental challenges. harsh environments, inspect the batteries every 3 months. When replacing the batteries, apply a corrosion preventive compound battery terminals, available at Amazon and most hardware stores.
- Page 15 10. Warranty Information We disclaim any responsibility for any technical error or printing error, or the consequences thereof. All trademarks and patents are recognized. We provide a 1-year limited warranty on this product against manufacturing defects, or defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased, and only to the original purchaser of this product.
Need help?
Do you have a question about the WH40 and is the answer not in the manual?
Questions and answers