TEC WiFi Link Quick Manual page 3

4. Connect your laptop computer or
mobile device to the TEC WiFi Link
wireless network. On your laptop
computer/mobile device, select and
connect to the TEC WiFi Link wireless
network. The network will be named
"DG700-SN" (where SN is the serial
number of the DG-700 gauge). The first
time you connect to this network, you
will be asked for a password/security key
- enter the default password/security key
tecwifi12
Note: If your laptop/mobile device is currently
connected to another wireless network, you
may need to disconnect from that network
before connecting to the TEC WiFi Link
network. The DG-700 gauge must be on in
order for the TEC WiFi Link network to be
visible from your laptop/mobile device.
5. Run your WiFi compatible software
and connect to the gauge. Check our
website www.energyconservatory.com/products/wifilink for
a list of WiFi compatible software. Refer to software specific
instructions.
For Advanced Information and Troubleshooting continue reading.
2