Page 2
SHOWVEN (info@showven.cn) or your local SHOWVEN partner for advice. X-H2 is very sensitive to the fluid quality, be sure to use SHOWVEN original FX-HF fog fluid, other fluid will lead to clog, fluid spill or malfunction. In case of eye contact of fog fluid, please wash it with clean water. If fluid is swallowed immediately look for medical advice.
Page 4
Operation Panel Δ 1. Button Functions: MENU: switch through setup menu +: Parameter up; multiplex “TIMER” (haze output time); -: Parameters down; multiplex “VOLUME” (haze output start) ENTER: confirm and save parameters (screen will blink once when save successfully); multiplex “STOP”. 2.
Page 5
Fill the fluid bottle with FX-HF fog fluid from SHOWVEN. For best effect please use SHOWVEN® original fluid FX-HF. Improper use of fluid will lead to machine malfunction. Warranty will be void if any other type of fog fluid is used.
Page 6
Remote control is optional configuration. Maintenance Δ 1. Use SHOWVEN® original fog fluid only. 2. Check the filter in fluid tank before each show, clean or replace it when it is necessary. 3. Running the machine at least once per month.
Page 7
Please don't repair machine without factory permission Below situations NOT included in warranty service: Damage caused by use other type of fog fluid which is not from SHOWVEN; Damage caused by improper transportation, usage, management, and maintenance, or damage caused by human factors;...
Need help?
Do you have a question about the X-H2 and is the answer not in the manual?
Questions and answers