Do you have a question about the 83A-105V80 and is the answer not in the manual?
Questions and answers
Catherine Anne Potter
April 17, 2025
I don't know it the back piece with the little cut outs goes on the top bottom or middle
1 comments:
Mr. Anderson
May 9, 2025
The back piece with cutouts on the HOMCOM model 83A-105V80 should be positioned with the cutouts aligned to the correct orientation as shown in the diagram. Ensure the cutouts are facing the back and properly aligned with other parts for cable or ventilation access. The correct position may also require the piece to be installed vertically or horizontally depending on the overall structure, with screw holes matching the frame.
Page 3
E- ... EN_ N OTE: Pull inner and outer drawer runners apart before fixing them to panels. FR_ R EMARQUE: Avant de fixer les glissieres de tiroir aux panneaux, tirez vers l'exterieur et poussez vers l'interieur de chacun des tiroirs. ES_ N OTA: retire los rieles interiores y exteriores antes de fijarlos a los panales.
Page 5
� N :- lt n:, _ ay b � n _ ecessary t � � djust the hinges so that the doors align.Use the mstructions beIow as a gu . ide. FR_II est parfois necessaire d'ajuster les charnieres pour un meilleur alignement des portes.
Page 11
x 28 x 28 6*30mm x 52 4*35mm 3*14mm 4*20mm x 16 x 16 4*20mm 3*16mm 6*50mm...
Need help?
Do you have a question about the 83A-105V80 and is the answer not in the manual?
Questions and answers
I don't know it the back piece with the little cut outs goes on the top bottom or middle
The back piece with cutouts on the HOMCOM model 83A-105V80 should be positioned with the cutouts aligned to the correct orientation as shown in the diagram. Ensure the cutouts are facing the back and properly aligned with other parts for cable or ventilation access. The correct position may also require the piece to be installed vertically or horizontally depending on the overall structure, with screw holes matching the frame.
This answer is automatically generated