actions->
Tab=Next Item
To enable dynamic VLAN, press [SPACE BAR] and [ENTER] to select Enabled in the
GVRP field.
16.5 LACP Configuration
Refer to the Port Trunking chapter for more information on LACP (Link Aggregate
Control Protocol).
Tab=Next Item
16.5.1 LACP Group Setting
Select LACP Group Setting in the LACP Configuration screen and press [ENTER] to
display the screen shown next.
Protocol Related Configuration
Intelligent Switch : GVRP Configuration
===================
GVRP : Enabled
<Edit>
Select the action menu.
BackSpace=Previous Item
Figure 16-11 SMT: GVRP Configuration
Dimension Switch ES-2008 : LACP Configuration
========================
LACP Group Setting
Port State Activity
LACP Group Status
Previous Menu
Configure LACP group setting.
BackSpace=Previous Item
Figure 16-12 SMT: LACP Configuration
Dimension ES-2008 Ethernet Switch
<Save>
Space=Toggle
Enter=Select Item
<Quit>
Esc=Action menu
16-7