Advertisement
Quick Links
blue
Filling the change tubes – What must be pointed out?
Two pathes to full tubes – Which one to take for my c
The coin changer can be provided with change either by inserting the tube coins when the empty tube cassette is
installed, or you remove the empty tube cassette and fill the cassette direct. The following table helps you deciding in
favour of the right filling method:
Filling by inserting coins
Filling speed
lower
Exact coin recording
guaranteed
Number of coins/tube
as many as you like
Pre-filling
–
Presettings
possible for more convenient filling
Coin changer
Filling the tube cassette direct
higher
guaranteed, precondition: presettings
as many as you like, we recommend a particular number for exact
coin recording
possible
required for exact coin recording
?
2
1
Advertisement
Related Manuals for Crane NRI currenza C2 blue
Summary of Contents for Crane NRI currenza C2 blue
- Page 1 blue Coin changer Filling the change tubes – What must be pointed out? Two pathes to full tubes – Which one to take for my c The coin changer can be provided with change either by inserting the tube coins when the empty tube cassette is installed, or you remove the empty tube cassette and fill the cassette direct.
- Page 2 Filling the tubes by inserting coins In many cases, the VMC also offers this filling method. In that case, this filling method should be used, due to the fact that the VMC may not be able to accept the filling level of the changer..without removing the tube cassette (standard) In order that the currenza c can count the inserted tube coins for audit and inventory purposes the coin changer is filled in the tube filling mode: Activate filling mode: Main menu >...
- Page 3 ... after having installed a tube cassette emptied completely If you remove and empty the tube cassette completely before refilling it, you must preset the coin changer once so that the tube counters will be reset before the filling process: Obligatory presettings: •...
- Page 4 Filling the tube cassette direct You can also remove the empty tube cassette and refill it direct. Or you have filled a replacement cassette beforehand and only replace the empty cassette on site. For audit and inventory purposes – in other words: for exact coin recording – you must preset the coin changer once for this filling method.
- Page 5 ... with non-counted coins Obligatory presetting: • activate automatic tube counter correction (cp. “Definitions”) Main menu E = Settings Operating modes Tube counter correction Menu path: > > > Once you preset the changer you can exchange or fill the tube cassette: Remove emtpy tube cassette and fill it with as many coins you like.
- Page 6 Definitions Float level Filling level limitation E = Settings > Coin settings > E = Settings > Coin settings > Float level Filling level limitation With a configured float level the change tubes With a configured filling level limitation are filled with a specific number of coins. each change tube collects no more than a When this number is reached when filling a specific number of coins.
Need help?
Do you have a question about the NRI currenza C2 blue and is the answer not in the manual?
Questions and answers