3Com 2848-SFP Plus User Manual page 28

28 C S
ONFIGURING THE WITCH
Information that you can view on the Summary screen
include:
System Information – Contains optional fields that
■
you can fill out to identify the Switch. It also shows
the object ID and the time elapsed since the Switch
was last started. After you update any of the
editable fields in this section, click Apply to save your
changes.
IP Information – Shows the IP address settings of the
■
Switch. To modify any of these settings, click IP
Settings. This takes you to the IP Settings screen,
shown in Figure 10 on page 30.
Switch Information – Shows the serial number, total
■
number of ports, and the version of the hardware
(board) on the Switch.
Management Software Information – Shows the
■
versions of the loader (firmware), and the operation
code version.
All manuals and user guides at all-guides.com
Changing the Admin Password
To prevent unauthorized users from accessing the Web
interface and modifying the Switch's settings, the
interface is password-protected.
The default admin account settings are:
User name – admin
■
Password – blank (no password)
■
To ensure that unauthorized users do not access the
Web interface, 3Com recommends that you set an
admin password when you first configure the Switch.
Figure 9 Password Screen