3Com 2848-SFP Plus User Manual page 22

22 C W
ONNECTING TO THE EB
To use Discovery to connect to the Web interface, do
the following:
On a computer that is connected to the Switch, insert
1
the CD-ROM into its CD drive.
Discovery should start automatically. If it does not start
automatically, go to the
CD-ROM, and then double-click
The Welcome screen of Discovery appears.
Figure 4 Welcome Screen of Discovery
2 If the computer has multiple network adapters, select
the adapter that connects the computer to the Switch,
and then click Next.
If the computer has only one adapter, click Next.
All manuals and user guides at all-guides.com
I
NTERFACE
folder on the
\Discovery
.
discovery.exe
Discovery searches the network for 3Com devices.
When detection is complete, the Discovered Devices
screen displays detected network devices.
Figure 5 Discovered Devices Screen
On the Discovered Devices screen, click Baseline Switch
3
2848-SFP Plus, and then click Next.
The Completing the 3Com Discovery Application screen
appears.
Click Finish.
4
The Web interface loads in your Web browser.